User's Manual

Annex B: Technical Specification
Reference Guide: CT2200HDV Page B-2
May 07
B.1.3 Shock and Vibration
The device chassis complies with the requirements of ETS 300-019-2-5
Table 2, for both non-operational and operational states, without any
special mounting or casing requirements over and above the standard
mounting requirements specified.
ETS 300-019-2-5 European Equipment Engineering (EE):
Environmental conditions and
environmental tests for
telecommunications equipment
Part 2-5: Specification of environmental
tests Ground Vehicle Installations.
Table 2.
B.1.4 CE Marking
The CE mark is affixed to indicate compliance with the following
directives:
89/336/EEC of 3 May 1989 on the approximation of the laws of the
Member States relating to electromagnetic compatibility.
73/23/EEC of 19 February 1973 on the harmonisation of the laws of the
Member States relating to electrical equipment designed for use within
certain voltage limits.
Note...
The CE mark was first affixed to this product in 2006.
B.1.5 FCC Marking
FCC ID: VFB-CT2200HDV0000
This device complies with Part 74 of the FCC Rules. Operation is subject to the following two
conditions. (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
B.1.6 TV Pick-Up Channel Assignments for US and Canadian
Users
The preferred channel arrangement defined for the TV pick-up systems are up to
seven 12 MHz one-way RF channels in the 2025 to 2110 MHz band.