User's Manual

Annex B: Technical Specification
Reference Guide: CT2200HDV Page B-1
May 07
Technical Specification
B.1 Compliance
1
B.1.1 Safety
This equipment has been designed and tested to meet the requirements of
the following:
EN 60950 European Safety of information technology equipment
including business equipment.
IEC 60950 International Safety of information technology equipment
including business equipment.
B.1.2 EMC
2
The equipment has been designed and tested to meet the following:
EN 55022
and
AS/NZS 3548
European
Australia and
New Zealand
Emission Standard
Limits and methods of measurement of
radio frequency interference
characteristics of information
technology equipment - Class A.
EN 61000-3-2
3
European Electromagnetic Compatibility (EMC),
Part 3 Limits; Section 2. Limits for
harmonic current emissions (equipment
input current ≤ 16 A per phase).
EN 61000-3-3
3
European Electromagnetic Compatibility (EMC),
Part 3. Limits; Section 3. Limitation of
voltage fluctuations and flicker in low
voltage supply systems for equipment
with rated current ≤ 16 A.
EN 55024:1998 European Information technology equipment -
Immunity characteristics - Limits and
methods of measurement.
1
The version of the standards shown is that applicable at the time of manufacture.
2
The EMC tests were performed with the Technical Earth attached, and configured using recommended cables.
3
Applies only to models of the equipment using mains (ac) power sources.