User's Manual

Chapter 4: Operating the Equipment
Reference Guide: CT2200HDV Page 8
May 07
Frequency input
In the Submenu „Frequency“ the current frequency is displayed.
To change the frequency press button 3 for approximately 2 sec.
The flashing curser indicates the current changing position of the frequency. With
button 1 or 2 the marked digit can be increased or decreased about one digit. To
change the next lower digit, press button 3 and repeat the step before. When
frequency change is complete so save the changes by press button 3 again to quit the
frequency setup.
NOTE: For use in US see guidance in chapter B.1.6
Software version
To display the actual software version enter the submenu „Software“.
** setup: **
Frequency
** setup: **
Frequency
2
3
50.0
** setup: **
Software
0.88