User's Manual

Chapter 1: Introduction
Reference Guide: CT2200HDV Page 3
May 07
Video Inputs
The CT2200HDV accepts only HDV encoded information at the input:
• HDV IEEE-1394a (Firewire)
CT2200HDV operates with all currently available HDV cameras.
OFDM Modulator
The digital data signal for wireless transmission is processed by the OFDM Modulator
and following IQ MOdulator. The OFDM (Orthogonal Frequency Division Multiplex)
modulation procedure has a major impact on the transmission properties and was
specifically developed for terrestrial radio transmission.
The setup of the OFDM modulator occurs automatically dependent on HDV format of
the camera.
Each setting is well proven and provides best quality for the customer without any
need of OFDM Modulator setup.
User interface
With its integrated Multifunctional Display it is easy to set up the transmit frequency,
display contrast and automatic display cutoff. The current Software version can also
be displayed.
Low-Power Linear Amplifier
The linear power amplifier amplifies the output signal of the Modulator to an output of
about 400 mW (+26 dBm). The output port of the Low-Power Amplifier is located on
top of the CT2200HDV.