Specifications

8
VII. Warranty
Broadcast Devices, Inc. products are warranted against failure due to faulty materials or workmanship for
a period of one year from the date of shipment to the ultimate user. The warranty covers repair or
replacement of defective parts at the factory, provided the unit has been returned prepaid by the user. All
shipments to the factory shall have affixed to the outside of the container an R. A. number obtained from
the factory. The above warranty is void if the unit has been modified by the user outside of any
recommendations from the factory or if the unit has been abused or operated outside of its electrical or
environmental specifications. If customer conducted field tests suggest that the unit may be faulty, whether
or not the unit is in warranty, a full report of the difficulty should be sent to Broadcast Devices, Inc. factory
at Cortlandt Manor, New York. The office may suggest further tests or authorize return for factory
evaluation.
Units sent to the factory should be well packed in the original packing if possible and shipped to
Broadcast Devices, Inc. 5 Crestview Avenue, Cortlandt Manor, NY 10567. Remember to affix the R.A.
number to the outside of the carton. Any packages received without such R.A. number will be refused.
Note: freight collect shipments will also be refused. When the unit has been received, inspected and tested,
the customer will receive a report of the findings along with a quotation for recommended repairs, which
are found falling outside of the standard warranty. Units returned for in-warranty repairs which are found
not to be defective will be subject to an evaluation and handling charge. In-warranty units will be repaired
at no charge and returned via prepaid freight.
Out-of-warranty units needing repair require a purchase order and will be invoiced for parts, labor, and
shipping charges.
When ordering replacement part, always specify A) Part number or Description, and Quantity; B) Date of
Purchase, Where Purchased; C) Any Special Shipping Instructions. Always specify a street address, as
shipping companies cannot deliver to a postal box.
Broadcast Devices, Inc. is not responsible for any other manufacturer’s warranty on original equipment.
Nor are we responsible for any failure, damage, or loss of property that may occur due to the installation or
operation of our equipment outside of recommended specifications.
Broadcast Devices, Inc. may from time to time make changes to the materials used in the manufacture of
its equipment and reserves the right to do so without further notice.