Operating Instructions

Specifications

Specifications With cable
Authentication / activation
Authentication-free charging Pilot signal (IEC 61851-1:2017)
Plug&Charge ISO 15118 ready
App activation eCharge+ app activation (Smartphone App for iOS
®
/ Android™)
Card activation RFID card activation
Remote activation Backend activation
Vehicle communication
Pilot signal (IEC 61851-1:2017)
Certifications
UL / FCC certificate (tested and confirmed by a certified body)
Specifications

Specifications With cable
Geometry
Measurements H x W x D (without eClick) 17 3/4“ x 7“ x 5“ (450 mm x 180 mm x 126 mm)
Cable length 21‘-4“ (6.5 m)
Installation type Wall
Weight (without eClick) 6.4 kg
Environment
Enclosure Rating Type 3S
Ambient temperature
-22 °F to +122 °F (-30 °C to +50 °C) full load
Thermal overload protection: output power reduced at higher temperatures
Storage temperature -22 °F to +176 °F (-30 °C to +80 °C)
Mains connection
Voltage supply 208 V AC, WYE; 240 V AC split phase / center tap delta
Connected load up to 10.4 kW / 12 kW
Charging ports
Number of charging ports 1
Output power up to 10.4 kW / 12 kW
Cable Type 1 SAE J1772
User interface
Display
LED ring for charging level; 2 status LEDs: authentication / RFID, vehicle link;
1 status LED as touch button: Bluetooth
Backend link WLAN with 2.4 GHz b/g/n with WPA2, LAN (only with eCharge+ app) or SIM (only with eOperate)
Backend protocol
eOperate using LG2WAN via SIM for business applications
and eHome using OCPP 2.0 via WLAN / LAN for residential application
Commissioning Via Bluetooth interface; Bluetooth Class 1 and 2 (power level)
Protective equipment
AC and DC fault monitor GFCI integrated (20 mA rms for AC and for DC)
Short circuit / overload protection Needs to be installed as described in the installation manual of the eClick
Remark
Android is a trademark
of Google LLC