Operating Instructions

IMPORTANT SAFETY INSTRUCTIONSIMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS
About this document
These operating instructions describe how
the eBox professional is operated properly.
The eBox must be handled as described here.
The eClick serves as a docking station,
that must be installed before the eBox can be
mounted. This prior installation is described
in detail in the installation instructions provided
with the eClick and must be performed by a
qualified electrician.
Please refer to the above-mentioned
installation instructions for the complete
installation.
Your personal safety is assured and the
eBox functions correctly only when you follow
exactly the steps in these instructions for
use. No work that is not described here may
be carried out on the eBox. When in doubt,
consult a qualified electrician.
In addition, use only accessory parts that have
been manufactured specifically for the eBox.
Intended purpose
These operating instructions apply to the
eBox professional and its use in USA and
Canada. Please note the safety standards
applying in the country of use.
eBox – intended use
The device is intended for indoor and outdoor
use. The charging instructions are listed on
an adhesive label provided with the eBox and
may be affixed to the side of the eBox in a
private environment. In the public environment,
the adhesive label must be affixed.
Make sure that you do not obscure any
information on the eBox. The owner ensures
that these instructions are legible at all times
in the public environment. All persons using
the eBox must first have read and understood
these instructions.
This design is intended exclusively for
the charging of electric vehicles fitted with a
Type-1 plug (SAE J1772-2009), and charging
current control via the pilot signal (IEC 61851-1).
The eBox may not be used to charge or sup-
ply other devices.
Please bear in mind:
• There must not be used any adapters,
converters, or charging cable extensions.
• The circuit breaker is installed outside of
the eBox and eClick and must be easily
accessible.
Slight injury and / or material damage
This symbol is in conjuction with the key word CAUTION indicates a possibly hazardous situation.
It might cause slight or minor injuries or a damage of the product or something in its vicinity if not avoided.
CAUTION
Improvement of the application
This symbol is in conjuction with the key word NOTE indicates hints for the user or very useful information.
This information helps with installation, set-up and operation of the product to ensure a fault-free operation.
NOTE
Risk of fatal injury
Warning of electrical voltage! This symbol is in conjuction with the key word DANGER indicates an imminent danger.
It will cause death or severe injuries if not avoided.
DANGER
Personal injury
This symbol is in conjuction with the key word WARNING indicates a possibly hazardous situation.
It might cause death or serve injuries if not avoided.
WARNING
IMPORTANT SAFETY INSTRUCTIONS
WARNING
When using electric products,
basic precautions must always be
followed, including the following.
SAVE THESE INSTRUCTIONS.
THEY MUST BE PROVIDED TO EACH NEW OWNER.