eMob-53/05.19 eBox smart OPERATING INSTRUCTIONS Broadband TelCom Power, Inc. 1719 S. Grand Ave. Santa Ana, CA 92705, USA sales@btcpower.com innogy-emobility.com Printed on certified 100% recycled paper.
Instructions for use Contents Fuelling becomes charging Contents 04 Important safety instructions Dear EV Driver, innogy offers you modern, leading-edge solutions for AC charging of electric vehicles (BEV and PHEV). Thank you for buying the eBox smart.
4 IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS 5 IMPORTANT SAFETY INSTRUCTIONS DANGER IMPORTANT SAFETY INSTRUCTIONS Risk of fatal injury Warning of electrical voltage! This symbol is in conjuction with the key word DANGER indicates an imminent danger. It will cause death or severe injuries if not avoided. WARNING Personal injury This symbol is in conjuction with the key word WARNING indicates a possibly hazardous situation. It might cause death or serve injuries if not avoided.
6 IMPORTANT SAFETY INSTRUCTIONS • Read all the instructions before installing, operating, maintaining, or using this product. • This device should be supervised when used around children. • Do not put fingers into the electric vehicle connector. • Do not use this product if the flexible power cord or the electric vehicle cable is frayed, has broken insulation, or any other signs of damage.
8 IMPORTANT SAFETY INSTRUCTIONS EMC compliance statement: FCC Part 15 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Limits are designed to provide reasonable protection against harmful interference in a residential installation.
10 Clicking the eBox into the eClick Clicking the eBox into the eClick 11 Clicking the eBox into the eClick CAUTION Ensure that the flat ribbon data cables are not trapped between the eClick and eBox when mounting the eBox. Before mounting the eBox, make sure the supply to the eClick is off. CAUTION The grub screws should only be fully inserted when the locking clip is fully inserted. 1 2a 90° 5 2b 3 4 01 Take the eBox and identify the connecting points (here red) on its rear side.
12 Launching the app DANGER Radiofrequency radiation exposure Information: This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 7 3/4‘‘ (20 cm) between the radiator and your body. Charging Launching the app Charging To activate bluetooth please press bluetooth pairing button (see chapter Product overview).
14 Troubleshooting MOVING AND STORAGE INSTRUCTIONS Troubleshooting Troubleshooting Most eBox malfunctions are caused by incorrect use. These errors can not be detected by the eBox and therefore cannot be displayed by the device. This for example applies to the following situations: • No power source connected • Charging cable not plugged in correctly If a malfunction persists despite adherence to the instructions for use, we recommend restarting the eBox.
16 Specifications Specifications Geometry Measurements H x W x D (without eClick) Cable length Installation type Weight (without eClick) Environment Enclosure Rating Ambient temperature Storage temperature Mains connection Voltage supply Connected load Charging ports Number of charging ports Output power Cable User interface LEDs Backend link Backend protocol Commissioning Protective equipment AC and DC fault monitor Short circuit / overload protection Specifications With cable 17 3/4“ x 7“ x 5“ (450 mm
18 Notes Legal notice Notes Legal notice The product eBox smart must always be used in conjunction with the eClick. 6. The product can be used in closed and public areas. Electric vehicle charger characteristics (IEC 61851-1 Ed 3): 7. The product can be installed on walls and in compatible Pole products. 8. The product eBox smart in conjunction with the eClick or coverage is rated electrical protection class I. The open eClick is rated electrical protection class I. 1.
