Install guide

3
1. System Requirement
Before you getting started, make sure that you meet the following requirements.
1. An Internet connection through a cable or DSL modem
2. A computer with an Ethernet network card or Wireless LAN Adapter installed
3. Your Windows CD, if your computer is running Windows 95, 98, or ME
4. UTP network cable with RJ-45 connector
5. Microsoft Internet Explorer 4.0 (or version above) or Netscape Navigator 4.0 (or
version above)
2. Package Contents
‧ One WLAN Broadband Router
‧ One Power adapter
‧ One CD-ROM(User Manual on CD)
‧ One Quick Installation Guide
‧ (Optional) One Reverse SMA Antenna
3. Hardware Installation
You can place this Wireless LAN Broadband Router horizontally or hang it on the wall.
(Metel Housing) (Plastic Housing)
4. Before Installation
Before you start to connect your router to any network device, make sure you get the
following values from your ISP. You will need those values to setup the Router and
configure you networked PCs to accept the IP address the Router chooses to assign them.
‧ PPPoE User Name and Password or Fixed Internet IP Address assigned by your local
ISP
‧ Your Subnet Mask
‧ Your Default Gateway
‧ Your Primary DNS IP address
You are supposed to have all those information mentioned above from your ISP. If not,
contact your ISP and they will be able to supply all the information you need.