Spec Sheet

SMOKE
ALARM
CAT.
SA350B
10-YEAR
LITHIUM POWER
10 years of continuous protection.
No battery change required. Provides
audible notice when alarm has
reached its end of life.
TAMPERPROOF
SEALED ALARM
Powercell cannot be removed.
DUAL IONIZATION
Dual Ionization sensing chamber.
Generally more effective at detecting
small particles produced by flaming
fires.
SILENCE FEATURE
Silences nuisance alarms.
TAMPER RESISTANT
Locks alarm to mounting bracket.
Perfect for apartment, dormitory or
hotel applications.
Description:
The BRK Cat. No. SA350B (model 0827) is a battery operated, lithium power cell
single station smoke alarm specifically designed for residential and institutional
applications including sleeping rooms of hospitals, hotels, motels, dormitories and
other multi-family dwellings as defined in standard NFPA 101. This alarm complies
with UL217, CSFM, NFPA 72, HUD, FHA and other agencies that model their codes
after the above agencies. It meets building codes where tamperproof 10-year
sealed lithium battery operated smoke alarms are required.
BRK SA350B features a dual ionization smoke sensing chamber, an 85 dB horn,
a sealed 10-year lithium power cell power supply that is permanently installed, a
single button for test/silence and a red LED that blinks to indicate unit is receiving
power. The tamperproof design will not allow the powercell to be removed. The
low power warning indicator will cause the alarm to “chirp” when it reaches the
end of its service life and needs to be replaced. Upon end of life, the unit meets
UL requirements for disabling the alarm and non-reinstallation of unit to mounting
bracket. Designed for surface mounting, the SA350B includes mounting anchors
and screws. Includes a gasketless base for easy installation and a new mounting
bracket that keeps the alarm secure over a wide rotation range to allow for perfect
alignment.
Sealed Lithium Power Cell
Listed to
Standard
UL 217
10-YEAR SEALED