Spec Sheet

CAT.
HD6135FB
135° FIXED &
RATE OF RISE
Microprocessor controlled -Features
Fixed Rate and Rate of Rise temperature
sensing - allows unit to alarm prior to
reaching the fixed temperature setting
of 135° F.
LATCHING ALARM
INDICATOR
Remembers which unit initiated an alarm.
SILENCE FEATURE
Silences nuisance alarms.
TWO LOCKING
FEATURES
Pins are provided to lock battery drawer
and/or alarm to base. Perfect for
apartment, dormitory or hotel
applications.
Description:
The BRK Brands, Inc. Model Number HD6135FB is a wire-in, 120V AC 60Hz single
and/or multiple station heat alarm designed to supplement smoke alarms in resi-
dential and institutional applications including sleeping rooms of hospitals, hotels,
motels, dormitories and other multi-family dwellings as defined in standard NFPA
101. Models HD6135FB complies with UL539, CSFM, NFPA 72, HUD, FHA and
other agencies that model their codes after the above agencies. They meet build-
ing codes where AC and AC/DC with Silence heat alarms are required. The alarms
are interconnectable with up to 18 devices, of which 12 can be smoke alarms. This
heat alarm is not a smoke alarm nor has it been designated a life safety device.
BRK Electronics HD6135FB is designed to give reliable early warning of heat from
fire. It is recommended for garages, crawl spaces, bathrooms, kitchens, laundry
rooms or other applications not suitable for smoke alarm installations. The unit
contains a thermistor that senses heat and will alarm when either the temperature
reaches 135°F or when a rate of rise of 15°F/minute is sensed by the micropro-
cessor. This feature enables a more rapid response to a potential fire. The unit
has an 85dB horn, a 9V battery backup power supply, an easy access side-load
battery drawer. This alarm features Alarm Latch: Easily identifies initiating alarm
even after alarm condition has subsided; Low Battery Silence: Temporarily silence
the low battery chirp for up to eight hours; Alarm Silence: Silence alarm for several
minutes. Two locking features are provided to prevent battery theft and/or theft of
the unit. Connection to AC power is made with a Quick-Connect wiring harness.
Installation is quick, easy and cost effective.
120V AC, 60Hz Wire-in
with 9V Battery Backup
HEAT
ALARM