Installation Sheet

92784 Rev. A
6
4
Valve Trim Installation
75 Series Installation
Potential scald or thermal shock injury could result due to cross ow if outlet at
the shower is blocked or restricted (e.g., pause control on showerhead). Be sure
to point showerhead away from you when re-starting ow or install inlet check
valves on both supply lines to prevent possible injury.
A.
2
1
3
Diverter Handle Installation
Insert diverter handle (1) onto trim sleeve (2).
Using a allen wrench, insert set screw (3) into
handle (1). Applying pressure, insert set screw
cover (4) until properly seated.
75 Series Maintenance
Faucet leaks from showerhead:
SHUT OFF WATER SUPPLIES. Replace Cartridge
Assembly –Repair Kit RP47201.
If water does not ow:
Verify that the hot side of the cartridge is installed
on the hot water supply line. If it is not, turn off
water supplies and ip cartridge.
4
5