Manualshelf

Installation Sheet

ManualsBrandsBrizo ManualsPlumbingThermostatic Valve Trim with Integrated Volume Control and 6 Function Diverter for Three Shower Applications - Less Handles and Rough-In
12345678910
101687 Rev. B
4
75 Series Installation
2
Diverter Cartridge Installation
Slip-On Installation
Slide bonnet nut (1) over diverter sleeve (2) and
thread into rough-in body.
NOTICE
: Over tightening may lead to
property damage or product failure. Hand
tighten securely.
B.
FOR DIVERTER CARTRIDGE INSTALLATION:
Apply silicone lube to the o-ring (2) to make
the diverter sleeve (3) easier to install diverter
cartridge.
Rotate the diverter cartridge (1) so the pin is at
the bottom for proper installation.
Apply silicone lube to the o-rings (4) to make
the diverter sleeve (3) easier to install diverter
cartridge.
Align diverter sleeve so that the notches are in
the same position as the notches on rough-in
body (5).
A.
3
1
5
2
1
2
5
4
Trim Sleeve Installation
Slide trim sleeve (1) over the bonnet (2),
cartridge, and rough-in body.
Ensure sleeve is properly positioned over the
front of cartridge.
1
2
A.
3
Trim Installation