Specification Sheet

ManualsBrandsBrizo ManualsTub & Shower FaucetsBrizo Vettis Two Handle Wall Mounted Tub Filler Less Rough In - Limited Lifetime Warranty

TWO HANDLE

WALL MOUNT

TUB FILLER

■ Vettis™ Bath Collection

Submitted Model No.: _______________________________________________

Specific Features: __________________________________________________

STANDARD SPECIFICATIONS:

• Trim only, rough-in R70400 required for

installation

• Three hole mount, 8" center-to-center

• Ceramic hot and cold mixing valves

(90˚ max rotation)

• Max. 14 gpm @ 60 psi, 53.0 L/min @ 414 kPa

Brizo Kitchen & Bath Company reserves the right (1) to make changes in specifications and materials, and (2)

to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See

current full-line price book or www.brizo.com for finish options and product availability.

BSP-L-T70488 Rev. A

T70488▲

COMPLIES WITH:

• ASME A112.18.1 / CSA B125.1

Indicates compliance to

ICC/ANSI A117.1

▲ Designate proper finish suffix

11 3/8"

(283 mm)

3 15/16"

(100 mm)

15 1/4"

(387 mm)

Min. 2 1/4" (57 mm)

Max. 3 3/8" (86 mm)

3 15/16"

(100 mm)

Finished Wall

WARRANTY

•

Lifetime limited warranty on parts (other than

electronic parts and batteries) and finishes:

or, for commercial users, for 5 years from

date of purchase.

•

5 year limited warranty on electronic parts

(other than batteries); or, for commercial

users, for 1 year from the date of purchase.

No warranty is provided on batteries.

12 1/2"

(316 mm)

3 15/16"

(100 mm)

WARNING: Risk of personal injury.

Do not

use the tub filler as a grab bar or support bar.

Install this product according to the

installation guide.

Brizo Kitchen & Bath Company

55 E. 111th Street, Indianapolis, IN 46280

350 South Edgeware Road, St. Thomas, ON N5P 4L1

Summary of content (1 pages)

PAGE 1
TWO HANDLE WALL MOUNT TUB FILLER ■ Vettis™ Bath Collection T70488▲ Submitted Model No.:________________________________________________ Specific Features:___________________________________________________ 15 1/4" (387 mm) 3 15/16" (100 mm) 3 15/16" (100 mm) 3 15/16" (100 mm) STANDARD SPECIFICATIONS: • Trim only, rough-in R70400 required for installation • Three hole mount, 8" center-to-center • Ceramic hot and cold mixing valves (90˚ max rotation) • Max. 14 gpm @ 60 psi, 53.