Specification Sheet

TWO HANDLE
WALL MOUNT
TUB FILLER
■ Odin
®
Bath Collection
Submitted Model No.: _______________________________________________
Specific Features: __________________________________________________
STANDARD SPECIFICATIONS:
• Maximum 9.3 gpm @ 60 psi, 35.2 L/min @ 414 kPa
• Trim only, rough-in R70400 required for installation
• Three hole mount, 7 7/8" center-to-center
• Ceramic hot and cold mixing valves
(90˚ max rotation)
• Optional RP92777 will accomodate up to Max.
4 1/2" depth - extension kit sold separately.
• Solid brass construction
• Drain not included
Brizo Kitchen & Bath Company reserves the right (1) to make changes in specifications and materials, and (2)
to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See
current full-line price book or www.brizo.com for finish options and product availability.
BSP-L-T70475-LHP Rev. A
T70475-▲LHP
COMPLIES WITH:
• ASME A112.18.1 / CSA B125.1
Indicates compliance to
ICC/ANSI A117.1
▲ Designate proper finish suffix
11 1/2"
(292 mm)
3 15/16"
(100 mm)
Min. 2 1/4" (57 mm)
Max. 3 3/8" (86 mm)
3 15/16"
(100 mm)
Finished Wall
12 1/8"
(308 mm)
3"
(76 mm)
Dia.
WARNING: Risk of personal injury. Do not
use the tub filler as a grab bar or support bar.
Install this product according to the
installation guide.
Brizo Kitchen & Bath Company
55 E. 111th Street, Indianapolis, IN 46280
350 South Edgeware Road, St. Thomas, ON N5P 4L1
© 2020 Brizo Kitchen & Bath Company
WARRANTY
• Parts and Finish - Lifetime limited warranty; or for
commercial purchasers, 10 years for multi-family
residential (apartments and condominiums) and
5 years for all other commercial uses, in each case
from the date of purchase.
• Electronic Parts and Batteries (if applicable) - 5
years from the date of purchase; or for commercial
purchasers, 1 year from the date of purchase. No
warranty is provided on batteries.
RP92777
Available Extension Kit
HX70475-▲
HL70475-▲
3 1/8"
(79 mm)
2"
(51 mm)
5"
(127 mm)
4 1/4"
(108 mm)