Owner's Manual

ManualsBrandsBrizo ManualsPlumbingFrank Lloyd Wright Two Handle Wall Mounted Tub Filler - Less Handles and Rough-in

12/05/18 Rev. B

102425

SILICONE

TWO HANDLE WALL MOUNTED TUB FILLER

SURTIDOR DE DOS MANIJAS PARA

BAÑERAS PARA INSTALACIÓN EN LA

PARED

ROBINET MURAL À DEUX MANETTES POUR

BAIGNOIRE

www.brizo.com

1-877-345-BRIZO (2749)

brizosupport@brizo.com

3/32" & 1/8"

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

To access additonal technical documents & product info, visit www.brizo.com

Para acceder a documentos técnicos adicionales e información sobre el producto, visítenos en www.brizo.com

Pour avoir accès à des documents techniques supplémentaires et à de l’information sur le produit,

visitez www.brizo.com

T704_______

Read all instructions prior to installation.

Make sure to purchase the correct water supply hook-up.

Lea todas las instrucciones antes de hacer la instalación.

Asegúrese de comprar la conexión correcta para el suministro de agua.

Veuillez lire toutes les instructions avant l’installation.

Assurez-vous d’acheter le bon dispositif de raccordement à la

tuyauterie d’alimentation.

Summary of content (8 pages)

PAGE 1
TWO HANDLE WALL MOUNTED TUB FILLER 102425 SURTIDOR DE DOS MANIJAS PARA BAÑERAS PARA INSTALACIÓN EN LA PARED T704_______ ROBINET MURAL À DEUX MANETTES POUR BAIGNOIRE Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici. Read all instructions prior to installation. Make sure to purchase the correct water supply hook-up. Lea todas las instrucciones antes de hacer la instalación.
PAGE 2
1 2B HANDLE INSTALLATION (for models with threaded bases) INSTALACIÓN DE LA MANIJA (para modelos con bases roscadas) NSTALLATION DE LA BASE DE MANETTE (pour les modèles pourvus de bases filetées) 2 1 3 1 4 5 2A HANDLE BASE INSTALLATION (for models with separate bases) INSTALACIÓN DEL REBORDE DE LA MANIJA (Para modelos con bases separadas) INSTALLATION DE LA BASE DE MANETTE (pour les modèles pourvus de bases distinctes) Install stems (1) to valves (2), secure stems (1) with screws (3).
PAGE 3
HOT-SIDE 6 3 1 2 4 3 COLD-SIDE 5 HANDLE INSTALLATION (for models with separate bases) A. I nstall two o-rings (1) onto splined handle adapter (2). Install adapter onto hotside (left) valve stem (3). Secure adapter with screw (4). F. R epeat steps A through D for installing handle onto cold-side (right) valve stem. G. M ake sure cold-side valve stem is rotated as far as possible in the clockwise direction. Install handle onto adapter so that handle lever is horizontal and pointed to the right.
PAGE 4
5 A. 3 1/2" (12.7 mm) PIS 1 2 1 B. 1 4 3 5 FLUSH YOUR SYSTEM SPOUT FLANGE AND SPOUT INSTALLATION Turn both faucet handles (1) to full open position. Turn on hot and cold supplies (if not already open) and flush water lines for one minute. Important:This flushes away any debris that could cause damage to internal parts or disrupt water flow from your faucet. A. I nstall gasket (1) onto brass nut (2). Install nut onto rough and tighten until nut is against finished wall.
PAGE 5
11 12 1 13 2 1/8" (3.17 mm) 3 15 5 4 6 14 7 3/32" (2.5 mm) 10 9 8 MAINTENANCE – SPOUT MAINTENANCE – VALVES SHUT OFF WATER SUPPLIES BEFORE SERVICING VALVE OR SPOUT ASSEMBLIES SHUT OFF WATER SUPPLIES BEFORE SERVICING VALVE OR SPOUT ASSEMBLIES If your faucet leaks at base of spout, replace o-ring (12) on spout adapter (11). A. L oosen set screw (13) on bottom side of spout escutcheon and pull straight out on spout to remove it from adapter. B. R eplace o-ring (12) on adapter (11). C.
PAGE 6
CLEANING AND CARE Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel. LIMPIEZA Y CUIDADO DE SU LLAVE Tenga cuidado al ir a limpiar este producto. Aunque su acabado es sumamente durable, puede ser afectado por agentes de limpieza o para pulir abrasivos.
PAGE 7
Limited Warranty on Brizo® Faucets Parts and Finish All parts (other than electronic parts and batteries) and finishes of this Brizo® faucet are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns the home in which the faucet was first installed or, for commercial users, the warranty period is ten (10) years for multi-family residential (apartments and condominiums and five (5) years for all other commercial us
PAGE 8
102425 Rev.