Specification Sheet

Submitted Model No.: _______________________________________________
Specific Features: __________________________________________________
STANDARD SPECIFICATIONS:
• Solid brass construction.
• Rotating handshower cradle rotates 90˚ in
either direction.
• Insulated floor and deck risers to control surface
condensation and heat.
• 60"-82" stretchable finished metal hose.
• High flow ceramic control valves.
• Twin lever handles.
• Certified dual check valves in handshower, 2.0 gpm
@ 80 PSI (7.6 L/Min @ 552 kPa).
• Bi-directional diverter.
• Dual column design, 8" center-to-center.
• Drain not included.
• Requires mounting hardware:
- RP73764 ▲ wall mount unions
- RP73765 ▲ deck mount risers
- RP73766 ▲ floor mount risers
• Floor mount configuration requires rough-in to
complete installation:
- R70200-WS with integrated stops.
- R70200 without stops, provides maximum flow.
• *Optional riser extension set (RP73767 ▲ ) provides
2" of additional spout height for deck and floor
mount configuration.
• **Optional spout reach extension set (RP80157 ▲ )
provides 2" of additional spout reach for wall, deck,
and floor mount configuration.
T70305▲
0
2
4
6
8
10
0 10 20 30 40 50 60 70 80 90
Pressure
(
PSI
)
Flow (U.
S
. Gallons Per Minute)
12
0 69 138 207 276 345 414 483 552 621
0
7.6
15.1
22.7
30.3
37.9
45.4
Pressure (kPa
)
Flow (Liters Per Minute
)
14
53.0
60.6
68.2
16
18
Handshower
Tub Filler w/ R70200-WS
Tub Filler
TWO HANDLE
WALL, DECK, AND
FLOOR MOUNT
FREESTANIDNG
TUB FILLER
■ Baliza
®
Collection
■ Wall, Deck or Floor Mount
COMPLIES WITH:
• ASME A112.18.1 / CSA B125.1
Indicates compliance to
ICC/ANSI A117.1 - Applies to valve control only.
BSP-B-T70305 Rev. C
13 1/8"
(333 mm)
▲ Designate Proper Finish Suffix
4"
(102 mm)
WARRANTY
• Lifetime limited warranty on parts (other than
electronic parts and batteries) and finishes:
or, for commercial users, for 5 years from
date of purchase.
**10 13/16"
(275 mm)
10 5/8"
(270 mm)
8"
(203 mm)
2 7/16"
(62 mm)
Dia.
**5 13/16"
(148 mm)
WARNING: Risk of personal injury. Do not
use the tub filler as a grab bar or support bar.
Install this product according to the
installation guide.
Wall Mount Configuration
Deck Mount Configuration
1 3/4"
(44 mm)
2 1/8"
(54 mm)
**9"
(229 mm)
*10 1/2"
(267 mm)
**11 5/16"
(287 mm)
2 5/16"
(59 mm)
2 5/16"
(59 mm)
**8 1/2"
(216 mm)
*8 3/4"
(222 mm)
*13 1/8"
(333 mm)
*2 1/2"
(64 mm)
**3 1/2"
(89 mm)
**6 11/16"
(170 mm)
**8 1/4"
(210 mm)
**9"
(229 mm)
13 1/8"
(333 mm)
8"
(203 mm)
4"
(102 mm)
2 1/8"
(54 mm)
1 3/4"
(44 mm)
2 7/16"
(62 mm)
T70210-▲LHP
7/8"
(22 mm)
7/8"
(22 mm)
3"
(76 mm)
Max. Deck
Thickness
Brizo Kitchen & Bath Company reserves the right (1) to make changes in specifications and materials, and (2) to
change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current
full-line price book or www.brizo.com for finish options and product availability.
Brizo Kitchen & Bath Company
Indianapolis, Indiana 46280
A Division of Masco Corporation of Indiana
© 2015 Brizo Kitchen & Bath Company