Installation Guide

ManualsBrandsBrizo ManualsPlumbingWall Mounted Tub Filler with Hand Shower from the Charlotte Collection

669

69 Re

v. C

TWO HANDLE TUB FILLER BODY AND

TUB FILLER TRIM KIT

GRIFERÍA PARA EL LLENADO DE BAÑERAS DE DOS

MANIJAS Y JUEGO DE PIEZAS DE ACCESORIOS

CORPS ET TROUSSE DE FINITION POUR ROBINET

DE BAIGNOIRE À DEUX MANETTES

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

You may need: / Usted puede necesitar: /

Articles dont vous pouvez avoir besoin:

74931

5/20/14 Rev. Cwww.brizo.com

Para instalación fácil de su llave Brizo

usted necesitará:

•LEER TODAS las instrucciones completamente antes de empezar.

•LEER TODOS los avisos, cuidados, e información de mantenimiento.

•Comprarlasconexionescorrectasparaelsuministro de agua.

For easy installation of your Brizo

faucet you will need:

•ToREAD ALL the instructions completely before beginning.

•To READ ALL warnings, care, and maintenance information.

•Topurchasethecorrectwater supply hook-up.

Pour installer votre robinet Brizo

facilement, vous devez:

•LIRE TOUTES les instructions avant de débuter;

•LIRE TOUS les avertissements ainsi que toutes les instructions de nettoyage

et d’entretien;

•Acheterlebonnécessairederaccordement.

ASMEA112.18.1/CSAB125.1

Models/Modelos/Modèles

T70210-sLHP & T703___-s

NOTE: Wall (RP73764s), deck (RP73765s) or ﬂoor risers (RP73766s) must

be ordered separately. A rough-in (R70200 / R70200-WS) is also required

for ﬂoor mount models.

NOTA: Las tuberías verticales de pared (RP73764s), encimera (RP73765s)

o piso (RP73766s) deben ordenarse por separado. Las tuberías internas

también se requieren para los modelos de instalación en el piso.

NOTE : Les tuyaux ascendants pour robinet à montage au mur

(RP73764s), sur plage (RP73765s) et sous le plancher (RP73766s) doi-

vent être commandés séparément. Un robinet brut (R70200 / R70200-WS)

est également requis pour les modèles à montage sous le plancher.

sSpecifyFinish

EspecifíqueelAcabado

PrécisezleFini

Available Mounting Options:

Opciones disponibles para la instalación:

Options de montage offertes :

Wall

Pared

Au mur

Deck

Encimera

Sur plage

Floor

Piso

Sous le plancher

T70305-s T70336-s T70385-s

T70210-sLHP

SoldSeparately

Sevendepor

separado

Vendu séparément

SoldSeparately

Sevendepor

separado

Vendu séparément

SoldSeparately

Sevendeporseparado

Vendu séparément

R70200 / R70200-WS (with stops)

Rough sold separately, must be installed

under ﬂoor prior to installation of trim.

R70200 / R70200-WS (con topes)

Latuberíainteriorsevendeporsepa-

rado, se debe instalar bajo el suelo antes

de la instalación de la moldura/accesorio.

R70200 / R70200-WS (avec robinet

d’arrêt) Robinet brut vendu séparément.

Doit être installé sous le plancher avant

lemontagedespiècesdenition.

Summary of content (16 pages)

PAGE 1
74931 TWO HANDLE TUB FILLER BODY AND TUB FILLER TRIM KIT GRIFERÍA PARA EL LLENADO DE BAÑERAS DE DOS MANIJAS Y JUEGO DE PIEZAS DE ACCESORIOS ASME A112.18.1 / CSA B125.1 CORPS ET TROUSSE DE FINITION POUR ROBINET DE BAIGNOIRE À DEUX MANETTES Models / Modelos / Modèles T70210-sLHP & T703___-s Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici.
PAGE 2
Limited Warranty on Brizo® Faucets Parts and Finish All parts (other than electronic parts and batteries) and finishes of this Brizo® faucet are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns the home in which the faucet was first installed or, for commercial users, for 5 years from the date of purchase.
PAGE 3
RP61825 Valve Cartridge - Hot Válvula de cartucho - Caliente Cartouche de robinet - eau chaude 12 8 10 3 RP75227 Handshower Cradle Mounting Hardware 9 11 13 2 Herraje para la instalación del soporte de la regadera de mano / ducha Pièces de montage du berceau de la douche à main 13 1 7 6 4 5 RP61824 Valve Cartridge - Cold Válvula de cartucho – Fría Cartouche de robinet - eau froide RP75228 Diverter Desviador Inverseur Maintenance If faucet leaks from under handle: 1. Remove handle (1). 2.
PAGE 4
T70210-sLHP RP75234▲ Cradle With Set Screw Soporte con el tornillo de ajuste Berceau avec vis de calage RP75226▲ Decorative Cover - Handshower Cubierta decorativa – regadera/ducha de mano Bague décorative - douche à main RP75227 Handshower Cradle Mounting Hardware Herraje para la instalación del soporte de la regadera de mano /ducha Pièces de montage du berceau de la douche à main RP61825 Valve Cartridge - Hot Válvula de cartucho - Caliente Cartouche de robinet - eau chaude RP61824 Valve Cartridge - Col
PAGE 5
T70305-s T70336-s RP34696▲ Handshower Ducha de mano Douche à main RP49645▲ Hose & Gaskets Manguera y Empaques Tuyau souple et joints RP75232▲ Handle Kit Juego de piezas para las manijas Trousse de manettes RP49645▲ Hose & Gaskets Manguera y Empaques Tuyau souple et joints RP34696▲ Handshower Ducha de mano Douche à main RP75233▲ Handle Kit Juego de piezas para las manijas Trousse de manettes RP51287 Stream Straightener and Wrench Enderezador del flujo de agua y llave de tuercas Concentrateur de jet e
PAGE 6
Cleaning and Care: Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.
PAGE 7
Body Installation (T70210-sLHP) - Deck or Floor Mounted Tub Fillers Instalación del cuerpo (T70210-sLHP) - Grifería para encimera o piso para bañeras/tinas Installation du corps (T70210-sLHP) - robinet de baignoire sur plage ou sous le plancher 1 A. C. 7 2 1 2 7 3 B. 6 4 D. 5 3 5 4 3 6 For Deck or Floor Mounted Tub Fillers A. Remove protective covers (1) from both risers (2). Make sure protective O-ring is installed in bonnet cover (3).
PAGE 8
1 Body Installation (T70210-sLHP) - Wall Mounted Tub Filler Instalación del cuerpo (T70210-sLHP) - Grifería para instalación en la pared, para bañeras/tinas Installation du corps (T70210-sLHP) - robinet de baignoire à montage au mur A. C. 5 2 5 1 1 2 B. D. 3 2 4 1 2 4 1 3 For Wall Mounted Tub Filler C. Securely tighten bonnet nuts (5). A. Make sure protective O-ring is installed in bonnet cover (1). Carefully, slide bonnet covers (1) over the extension tubes (2). D.
PAGE 9
Spout Installation (T703__-s) - Wall, Deck or Floor Mounted Tub Fillers Instalación del surtidor (T70305-s) - para la pared, encimera o piso para bañeras/tinas Installation du bec (T703__-s) - robinets de baignoire au mur, sur plage ou sous le plancher 2 A. C. 4 2 1 B. D. 1 2 4 3 5 1 5 A. Unscrew the decorative cover (1) and remove from body (2). C. Securely tighten nut (4). B. Carefully place cover (1) over end of spout (5). Place rubber seal (3) on D.
PAGE 10
3 Handle Installation (T70385-s & T70336-s) - Wall, Deck or Floor Mounted Tub Fillers Instalación de la manija (T70385-s & T70336-s) - la pared, encimera o piso para bañeras/tinas Installation des manettes (T70385-s & T70336-s) - robinets de baignoire au mur, plage ou le plancher C. A. 6 7 1 2 8 3 D. B. 10 7 11 4 8 4 3 9 5 C. Secure handle assembly with screw (6). Assemble O-ring (7) to plug A. Slide adapter (1) onto cartridge stem (2).
PAGE 11
3 Handle Installation (T70305-s) - Wall, Deck or Floor Mounted Tub Fillers Instalación de la manija (T70305-s) - la pared, encimera o piso para bañeras/tinas Installation des manettes (T70305-s) - robinets de baignoire au mur, plage ou le plancher C. A. 6 2 1 5 3 7 B. 8 D. 3 4 10 5 8 7 1 9 11 C. Place handle lever (6) over screw (5) and secure with set screw (7). A. Slide adapter (1) onto cartridge stem (2). Thread handle base (3) Thread finial (8) into the end of handle.
PAGE 12
4 Handshower Installation (T703__-s) - Wall, Deck or Floor Mounted Tub Fillers La instalación de la regadera de mano (T703__-s) - la pared, encimera o piso para bañeras/tinas Installation de la douche à main (T703__-s) - robinets de baignoire au mur, sur plage ou sous le plancher C. A. 8 3 8 2 2 7 1 6 B. D. 9 4 6 4 5 7 2 A. Check hose nut (1) to ensure it contains gasket (2) inside. Thread C. Check hose nut (7) to ensure it contains gasket (2) inside nut (7). Install B.
PAGE 13
TWO HANDLE - WALL MOUNT TUB FILLER UNIONS (SUPPLY TRIM) INSTALACIÓN EN LA PARED - DOS MANIJAS UNIONES DE LLAVES DE AGUA PARA EL LLENADO DE LA BAÑERA/TINA (ACCESORIO DE SUMINISTRO) UNIONS (D'ALIMENTATION ET DE FINITION) POUR ROBINET MURAL DE BAIGNOIRE À DEUX MANETTES 74937 ASME A112.18.1 / CSA B125.1 RP73764s Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici.
PAGE 14
A. C. B. 1 2 1 1 3 2 1 3 2 2 Front View / Vista frontal / Vue de face 8" (203 mm) 8 po 1 Side View / Vista lateral / Vue de côté 1/2" (13 mm) 1/2" po 2 1 1/2" (38 mm) 1 1/2 po Finished Wall Pared terminada Mur fini A. Obtain and install 1/2" threaded pipe nipples to (1) supply elbows. Note: Supply elbows and water lines must be securely anchored and positioned 8" on center. Water lines must be a minimum of 1/2" (13 mm) iron pipe securely fastened and strapped to rigid stringers. B.
PAGE 15
E. D. 3 2 2 1 1 4 4 3 3 2 Lubricate O-rings Lubrique las juntas tóricas Lubrifiez les joints toriques 2 3 D. Install o-rings (1) into both escutcheons (2). Apply silicone sealant to the back edge of the escutcheons (2) and slide over extension tubes (3). Press escutcheons against the wall and wipe off any excess sealant. E. Install four o-rings (1) and (2) onto both adapters (3), and slide adapters into wall extension tubes (4). D.
PAGE 16
Limited Warranty on Brizo® Faucets Parts and Finish All parts (other than electronic parts and batteries) and finishes of this Brizo® faucet are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns the home in which the faucet was first installed or, for commercial users, for 5 years from the date of purchase.