Installation Guide

ManualsBrandsBrizo ManualsTub & Shower FaucetsBrizo Deck Mounted Roman Tub Filler Trim with Built-In Diverter and Handshower with H2Okinetic Technology from the Sotria Collection

9/19/13 Rev. A

Para instalación fácil de su llave

Brizo

usted necesitará:

•LEER TODAS las instrucciones completamente

antes de empezar.

•LEER TODOS los avisos, cuidados, e

información de mantenimiento.

•Paracompletarelbordeylainstalacióndevál-

vulas dentro de las paredes previa a la

instalacióndelallaveysusaccesorios.

For easy installation of your Brizo

faucet you will need:

•ToREAD ALLtheinstructionscompletely

beforebeginning.

•ToREAD ALLwarnings,care,and

maintenance information.

•Tocompletethedeckandvalverough-inpriorto

installingthistrimkit.

Pour installer votre robinet Brizo

facilement, vous devez:

•LIRE TOUTESlesinstructionsavantdedébuter;

•LIRE TOUS les avertissements ainsi que toutes

lesinstructionsdenettoyageetd’entretien;

•Installezlecorpsdurobinetetterminezle

pourtourdubainavantdeposerlesaccessories

de finition.

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:

SILICONE

ASME A112.18.1 / CSA B125.1

Models/Modelos/Modéles

T67350s&T67450s

Series/Series/Seria

Sotria™

TWO HANDLE ROMAN TUB TRIM

LLAVE Y SUS ACCESORIOS PARA BAÑERA

ROMANA DE DOS MANIJAS (MANERALES)

ACCESSOIRES DE FINITION DE ROBINET

À DEUX POIGNÉES POUR BAIN ROMAIN

“TheCommonwealthofMassachusettsrequiresallhand-heldshowerspraystocomplywiththeMassa-

chusettsStatePlumbingCode248CMRwherebytheirinstallationshallincludeadevicethatlimitsthe

maximumdeliverabletemperatureofhotwaterto110°Fandanapprovedbackowpreventionsystem.”

“LaCommonwealthdeMassachusettsrequierequetodoslosrociadoresdemanocumplanconelcódigo

248CMRdeplomeríadelestadodeMassachusettsporelquesuinstalaciónincluyaundispositivoque

limitalatemperaturamáximadelasalidadelaguacalientea110°Fyunsistemaaprobadodeprevención

decontraujo.”

«LeCommonwealthduMassachusettsexigedetouslespulvérisateurstenusdanslamaindedouche

d’êtreconformesaucode248CMRdetuyauteried’étatduMassachusettsparlequelleurinstallation

inclueundispositifquilimitelatempératurelivrablemaximumdel’eauchaudeà110°Fetàunsystème

approuvéd’empêchementderefoulement.»

T67350s

T67450s

76133

Optional

Opcional

Facultative

3/32"

(2.38 mm)

1/8"

(3.17mm)

▲SpecifyFinish/EspecifíqueelAcabado/PrécisezleFini

3/32"

(2.38 mm)

1/8"

(3.17mm)

Summary of content (8 pages)

PAGE 1
TWO HANDLE ROMAN TUB TRIM 76133 LLAVE Y SUS ACCESORIOS PARA BAÑERA ROMANA DE DOS MANIJAS (MANERALES) ACCESSOIRES DE FINITION DE ROBINET À DEUX POIGNÉES POUR BAIN ROMAIN ASME A112.18.1 / CSA B125.1 Models/Modelos/Modéles T67350s & T67450s Series/Series/Seria Sotria™ Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici. T67350s T67450s You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin: 3/32" (2.38 mm) 1/8" (3.
PAGE 2
Limited Warranty on Brizo® Faucets Parts and Finish All parts (other than electronic parts and batteries) and finishes of this Brizo® faucet are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns the home in which the faucet was first installed or, for commercial users, for 5 years from the date of purchase.
PAGE 3
Model / Modelo / Modèle T67450s Model / Modelo / Modèle T67350s RP76555▲ Lift Rod Assembly Ensamble de la barrita de alzar Tirette RP76556▲ Allen Wrench, Set Screw & Button Llave Allen, Tornillo de Ajuste y Botón Clé Allen, Vis et Bouton RP76556▲ Allen Wrench, Set Screw & Button Llave Allen, Tornillo de Ajuste y Botón Clé Allen, Vis et Bouton RP20368 Gasket Empaque Joint RP20368 Gasket Empaque Joint RP76554▲ Handle & Glide Ring Manija y Aro Deslizable Poignée et l’anneau glissant RP20368 Gasket Empaque
PAGE 4
A. B. T67450 1 2 RP40668 Diverter Assembly Ensamble del Desviador Dérivation 3 2 3 1 2 1 Maintenance B. Model T67450 A. If faucet leaks from spout outlet: Shut off water supplies – If faucet does not divert water from the spout to the hand shower, check that the lift rod (1) is securely threaded into the diverter (2). If the problem persists remove the lift rod and spout. Replace the diverter assembly RP40668. Replace Seats and Springs (1).
PAGE 5
1 T67350 2 T67350 9 8 6 1 4 2 5 7 1 3 T67450 T67450 9 8 1 2 6 3/32" (2.38 mm) 3/32 po 4 2 7 5 1 3 Install gasket (1) into groove in bottom of handle base (2). OPTION: Use silicone under the gasket if deck is uneven. Place handle base (2) over adapter (3) and secure with nut (4). Repeat for other end valve. Install gasket (5) into groove in bottom of spout (6). Place spout with gasket over the spout adapter (7). Be sure spout is resting firmly on the deck.
PAGE 6
3 A. T67450 3 C. 4 T67450 2 1 5 1 4 2 3 B. T67450 D. T67450 1 2 1 4 3 For Model T67450 Only C. Pull metal braided hose (1) through hand shower base (2). Place base (2) A. Install lift rod (1). Screw the lift rod until it drops down and rotates onto nest (3) and secure with set screw (4). Install button (5) over set screw. CAUTION: Be sure that metal braided hose does not fall back freely. Place finial (2) onto lift rod and secure with set screw (3). Install button (4). B.
PAGE 7
4 A. 5 T67350 1 1 3 1 2 T67450 B. 2 1 1 2 4 2 3 Model T67350 Turn faucet handles (1) all the way on. Turn on hot and cold water supplies and flush water lines for one minute. Important: This flushes away any debris that could cause damage to internal parts. A. Place spline adapters (1) over valve stems (2) and secure with screws (3). Make sure stem is in the off position. Repeat for other handle. B.
PAGE 8
6 A. B. T67450 T67450 2 1 3 2 1 For Model T67450 Only A. Pull hose (1) to its farthest extension and point it down into the B. Attach hand piece (1) to hose (2) with gasket (3) between tub. Pull the lift rod (2) up to the full on position and flush water lines for one minute. After flushing turn off water at the bath valve handles. Return the lift rod to the down position. connection. Refer to maintenance section (page 4) for correct diverter and lift rod function.