Installation Sheet

92783 Rev. A

60 Series Installation

Shower head and Tub Spout Installation

(For shower head and tub spout installation refer to the installation guides provided

with your shower head and tub spout)

Slide O-ring (1) over cartridge and the bonnet

nut (2). The O-ring, which acts as a spacer to

steady the sleeve, should rest behind the

bonnet nut.

If your model requires a spacer (1), install it into

sleeve (2). Slide the sleeve over the cartridge, body

and O-ring. Ensure sleeve is properly positioned

over the front of cartridge. Note: RSVP

models

(series T60X90) do not require spacer (1).

Valve Trim Installation

(See page 6 & 7 for Siderna

valve trim installation.)