Installation Sheet

SHOWERHEAD AND SHOWER ARM INSTALLATION:
Install a 1/2" threaded pipe nipple to extend beyond the nished
wall 3/8" to 1/2". Apply plumber's tape to thread on pipe nipple
and screw brass adapter (1) securely onto nipple. Screw
showerhead (2) onto the shower arm, using provided wrench (4)
to tighten securely. Check position of set screw on top of shower
arm (3) making sure it is not sticking through to the inside
opening where it could interfere with the assembly. Slide shower
arm and head assembly over the adapter and tighten set screw
against the adapter.
1
3
2
4
3
1
4
2
1
3
2
4
Sotria
RP75722
p
RSVP
RP48040
p
Virage
RP62603
p
3
1
5
6
Vettis
RP90243
p
Levoir
RP92044
p
SHOWERHEAD AND SHOWER ARM INSTALLATION:
Apply plumber tape to threads on brass adapter (1). Install
adapter so that it extends beyond the finished wall 1-1/4" to
1-1/2". Ensure that O-Rings (2) are installed properly into
grooves on adapter.
Slide shower ange (3) over shower arm (4). Install shower arm
(4) onto brass adapter (1), and secure with set screw (5) on side
of shower arm. Slide ange (3) until it is at against the nished
wall.
Vettis
®
only: Apply plumber tape to threads on shower arm (4).
Thread showerhead (6) onto shower arm. Do not overtighten
showerhead.
2
4
3
1
5
6
2
4
RP75722
p
Shower Arm
RP48040
p
Shower Arm
RP62603
p
Shower Arm
RP90243
p
Shower Arm
RP92044
p
Shower Arm
NOTE: It is suggested that you anchor your shower arm or water lines.
03/12/2018 Rev. A1
www.brizo.com
pSpecify Finish
92781