COMMAND THE ROOM Brizo Voice Activation Technology allows you to dispense the exact amount of water you need, completely hands-free. Just command your faucet to turn on and off, warm the water, dispense a metered amount or create custom container amounts–luxury answers to you.
MATERIALS REQUIRED These instructions begin with an installed Brizo SmartTouch® faucet*. If you have not installed your faucet yet, please follow the instructions for faucet installation prior to installing your Brizo VoiceIQ™ Module. You will also need a smartphone or tablet and the following to complete the set-up: A POWER SOURCE Under the sink. Not controlled by a switch. A CONNECTED HOME DEVICE Amazon® Alexa® or Google® Assistant. A HOME WI-FI SYSTEM And your login information.
INSTALLATION INSTRUCTIONS STEP 1. STEP 2. Turn off your water supply. Remove the plastic clip from the bottom of your existing solenoid.
STEP 3. STEP 4. Remove the existing hose by gently pulling it downward. Slide the new VoiceIQ™ Module unit onto the bottom of your existing solenoid.
STEP 5. STEP 6. Swivel the retainer clip upward and click it into place. Slide the hose onto the VoiceIQ™ Module and secure it with the retaining clip.
STEP 7. STEP 8. Connect the ethernet cable to the voice module and the existing solenoid. Connect the power supply to the solenoid and to an outlet that is not controlled by a switch. Reinstall SmartTouch® solenoid batteries* and turn on water supply. * in case of power outage, touch activation will revert to battery power.
104181 Rev.
INSTALLATION INSTRUCTIONS (CON’T) Connect your Smartphone or tablet to your VoiceIQ™ Module’s Wi-Fi signal, “BRIZO-ABC”. Your VoiceIQ™ Module will have a unique identifier in the name of the Wi-Fi connection, shown here as “ABC” Open a browser and enter the URL 10.10.10.1 for product setup. Follow the steps on screen. Bookmark device.brizo.com for easy access to the Web app, where you can see settings, FAQs and a list of voice commands.
VOICEIQ™ MODULE LED COLOR INDICATORS This light can be found on your VoiceIQ™ Module under the sink, not at the faucet base. BLINKING GREEN Wi-Fi setup mode: indicates the VoiceIQ™ Module is trying to connect to Wi-Fi. If blinking continues for more than 3 minutes, you may need to reconnect it to your home Wi-Fi. BLINKING RED Indicates that the required AC power is not connected (blinks once every 5 seconds). SOLID GREEN Indicates a successful connection to the Wi-Fi.
TROUBLESHOOTING TIPS If your VoiceIQ™ Module is blinking a red light every 5 seconds, this indicates an issue with the power supply. Verify that the outlet you’ve plugged your module into isn’t connected to your garbage disposal switch by plugging something else into the outlet (lamps and other lights work best, but anything that lights up or makes noise and doesn’t have a backup battery will work), then switching your garbage disposal on and off.
TROUBLESHOOTING TIPS (CON’T) If device fails to connect after entering Wi-Fi network name and password and the LED on voice module is solid red, check the following: A. D ouble check that the password for your VoiceIQ™ Module’s Wi-Fi was entered correctly. B. T he VoiceIQ™ Module works with 2.4 GHz Wi-Fi. If your router has both 2.4 GHz and 5.0 GHz, please make sure you use 2.4 GHz. When scanning for Wi-Fi networks on your mobile device, only the 2.4 GHz network will appear.
VOICE ACTIVATION by
