Specification Sheet

ManualsBrandsBrizo ManualsTub & Shower FaucetsBrizo Sensori Custom Thermostatic Shower System with Wall and Ceiling Showerhead, Volume Controls, Body Sprays, and Hand Shower - Valves Included

Submitted Model No.: _______________________________________________

Specific Features: __________________________________________________

81375▲

SHOWERHEAD

■ Round Ceiling Mount Showerhead

■ 2.5 GPM Max @ 80 PSI

STANDARD SPECIFICATIONS:

• Standard 1/2" pipe fitting connection.

• 2.5 GPM Max @ 80 PSI.

• Wrench flats for tightening.

• Solid fabricated brass showerhead.

• Showerhead is intended for ceiling supply but ball

connector rotates and pivots (15˚ in all directions)

so it can be used with wall mounted showerheads.

0102030405060708090

Pressure (PSI)

Flow (U.S. Gallons Per Minute)

069 138 207 276 345 414 483 552 621

3.8

7.6

11.4

15.1

18.9

22.7

Pressure (kPa)

Flow (Liters Per Minute)

COMPLIES WITH:

•

ASME A112.18.1 / CSA B125.1

BSP-B-81375 Rev. B

Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue

models, both without notice or obligation. Dimensions are for reference only.

▲ Designate proper finish suffix

81375▲ Showerhead

7 7/8"

(200 mm)

2 5/8"

(66 mm)

Full Spray

WARRANTY

•

Lifetime limited warranty on parts (other than

electronic parts and batteries) and finishes:

or, for commercial users, for 5 years from

date of purchase.

•

5 year limited warranty on electronic parts

(other than batteries); or, for commercial

users, for 1 year from the date of purchase.

No warranty is provided on batteries.

Delta Faucet Company

55 E. 111th Street, Indianapolis, Indiana 46280

350 South Edgeware Road, St. Thomas, ON N5P 4L1

1/2"-14 NPSM

Summary of content (9 pages)

PAGE 1
SHOWERHEAD ■ Round Ceiling Mount Showerhead ■ 2.5 GPM Max @ 80 PSI 81375▲ Submitted Model No.:________________________________________________ Specific Features:___________________________________________________ STANDARD SPECIFICATIONS: • Standard 1/2" pipe fitting connection. • 2.5 GPM Max @ 80 PSI. • Wrench flats for tightening. • Solid fabricated brass showerhead.
PAGE 2
body Spray ■ 2.0 GPM ■ 1/2" Rough-In 84110 Submitted Model No.:______________________________________________ Specific Features:_________________________________________________ 2 9/32" (58 mm) Dia. Standard Specifications • 1/2” rough-in.* • 30˚ up and down adjustment. • 2.0 gpm @ 80 PSI. • Solid brass construction. • Matching finish spray face. • Touch-clean® nubs. *Note: This installation requires a 1/2" male threaded pipe fitting to extend 1/4" beyond the finished surface. 1 1/2" 38 mm) Dia.
PAGE 3
RAINCAN SHOWERHEAD ■ Odin™ Bath Collection ■ Showerhead Featuring H2Okinetic Technology® ■ 2.0 GPM Max @ 80 PSI 87375▲ Submitted Model No.:________________________________________________ Specific Features:___________________________________________________ STANDARD SPECIFICATIONS: • H2Okinetic Technology® single function showerhead. • Finished sprayface matches shell finish. • Showerhead has 1/2"-14 NPSM 87375▲ Showerhead female connection. • 2.0 gpm @ 80 PSI. • Wrench flats for tightening.
PAGE 4
HAND SHOWER W/ SLIDE BAR n Odin™ Bath Collection n H2Okinetic Technology® 88775▲ STANDARD SPECIFICATIONS: Submitted Model No.:________________________________________________ Specific Features:___________________________________________________ 2 1/2" Dia. (64 mm) 2 3/4" Dia. (68 mm) 1/2” - 14 NPSM 22” (559 mm) • 2.0 gpm @ 80 psi (7.6 L/min @ 552 kPa) • Hand shower with full spray pattern. • Certified dual check valves.
PAGE 5
SENSORI® CUSTOM SHOWER ROUGH VALVE BODY R66000-WS Submitted Model No.:__________________________________________________ Specific Features:_____________________________________________________ 4 1/4" (108 mm) 3" (76 mm) 3 1/4" +/- 1/8" (76 mm +/- 3 mm) 7" (178 mm) *Finished Wall Stringer RP72604▲ Available Extension Kit *Depending on the location of valve within the wall and wall thickness an optional extension kit (RP72604) can provide an additional 1 3/4" of wall thickness.
PAGE 6
SENSORI® CUSTOM SHOWER ROUGH R66600 Submitted Model No.:______________________________________________ ■ R66600 ■ Volume Control Rough ■ 3/4" Rough-In Specific Features:_________________________________________________ STANDARD SPECIFICATIONS 2 3/8" (60 mm) 1 5/16" (33 mm) • Forged brass body. • Includes ceramic stem assembly. • All parts are replaceable from the front. • Recommended working pressure of 45-80 PSI. • Volume controls are rquired for every outlet and every set of body sprays (up to 7.
PAGE 7
CEILING MOUNT SHOWERARMS AND FLANGE RP48985 RP48986 Submitted Model No.:________________________________________________ Specific Features:___________________________________________________ STANDARD SPECIFICATIONS: • Nipples and flange are of solid brass construction. • Adjustable flange is held in place on showerarm by rubber friction ring. 2 3/8' Dia.
PAGE 8
SENSORI® CUSTOM SHOWER TRIM ■ Odin™ Collection ■ Volume Contol Trim T66675 Submitted Model No.:______________________________________________ Specific Features:_________________________________________________ STANDARD SPECIFICATIONS • Must also order R66600 Rough-In. • 180˚ handle rotation controls volume only. • Volume controls are required for every outlet and every set of body sprays (up to 7.7 gpm @ 60 PSI). • All parts are replaceable from the front. • Adjusts for wall thickness variations.
PAGE 9
SENSORI® CUSTOM SHOWER TRIM ■ Odin™ Collection ■ Thermostatic Control Trim T66T075 Submitted Model No.:______________________________________________ Specific Features:_________________________________________________ STANDARD SPECIFICATIONS 7 1/2" (191 mm) Dia. • Sensori® thermostatic control. • Must also order R66000-WS rough valve body. • Includes Sensori® thermostatic cartridge. • Thermostatic wax element maintains the outlet temp to +/- 3.6˚ F.