Installation Sheet

ManualsBrandsBrizo ManualsTub & Shower FaucetsBrizo Odin 1.75 GPM Single Function Hand Shower Package - Includes Slide Bar, Hose, and Wall Supply

Cleaning and Care

Care should be given to the cleaning of this

product. Although its finish is extremely

durable, it can be damaged by harsh abrasives

or polish. To clean, simply wipe gently with a

damp cloth and blot dry with a soft towel.

Instructions de nettoyage

Il faut le nettoyer avec soin. Même si son

fini est extrêmement durable, il peut être

abîmé par des produits fortement abrasifs

ou des produits de polissage. Il faut simple-

ment le frotter doucement avec un chiffon

humide et le sécher à l'aide d'un chiffon

doux.

Limpieza y Cuidado de su Llave

Tenga cuidado al limpiar este producto.

Aunque su acabado es sumamente

durable, puede ser afectado por agentes

de limpieza o para pulir abrasivos. Para

limpiar su llave, simplemente frótela con

un trapo húmedo y luego séquela con una

toalla suave.

72586 Rev. C

Backflow Protection System

Your Brizo

hand shower incorporates a back-

flow protection system that has been tested to

be in compliance with ASME A112.18.3 and

ASME A112.18.1 / CSA B125.1. It incorpo-

rates two certified check valves in series,

which operate independently and are integral,

non-serviceable parts of the wand assembly.

Sistema de protección contra

el contraflujo

Ducha de mano Brizo

tiene un sistema de

protección contra el contraflujo, incorpora-

do, que ha sido probado para cumplir con

los requisitos de ASME A112.18.3 y ASME

A112.18.1 / CSA B125.1. Este incorpora en

la pieza de mano dos válvulas de retención

o checadoras certificadas en una serie,

las cuales operan independientemente y

son piezas integrantes que no requieren

servicio.

Dispositif anti-siphonnnage

Douche à main Brizo

comporte un dispositif

anti-siphonnage qui a été éprouvé et qui est

conforme aux normes ASME A112.18.3 et

ASME A112.18.1 / CSA B125.1. Ce dispositif

se compose de deux clapets indépendants

homologués, montés en série dans le tube

rigide, qui sont non réparables.

RP73147s

Hand Held Shower

Regadera de Mano

Douche à main

RP73150s

Wall Outlet

Codo de pared

para el suministro

Sortie de douche

de mur

RP49645s

Hose & Gaskets

Manguera con

Empaques

Tuyau avec joints

RP73155

Mounting Hardware (2 Sets)

Herraje de Instalación

(2 sistema solamente)

Pièces de montage

(2 ensemble seulement)

RP73152

Set Screws (1)

Tornillos de Ajuste (1)

Vis de calage (1)

Hex Keys (1)

Llaves Allen Hexagonales (1)

Clés hexagonales (1)

RP73151s

Slide Assembly & Nest

Ensamble de la Barra Deslizable y soporte

Coulisseau et logement

sSpecify Finish

sEspecifíque el Acabado

sPrécisez le Fini

Summary of content (6 pages)

PAGE 1
RP73147s Hand Held Shower Regadera de Mano Douche à main RP73150s Wall Outlet Codo de pared para el suministro Sortie de douche de mur RP73152 Set Screws (1) Tornillos de Ajuste (1) Vis de calage (1) Hex Keys (1) Llaves Allen Hexagonales (1) Clés hexagonales (1) RP49645s Hose & Gaskets Manguera con Empaques Tuyau avec joints RP73151s Slide Assembly & Nest Ensamble de la Barra Deslizable y soporte Coulisseau et logement ▲Specify Finish ▲Especifíque el Acabado ▲Précisez le Fini RP73155 Mounting Hardware
PAGE 2
Limited Warranty on Brizo® Faucets Parts and Finish All parts (other than electronic parts and batteries) and finishes of this Brizo® faucet are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns the home in which the faucet was first installed or, for commercial users, for 5 years from the date of purchase.
PAGE 3
BRIZO® SHOWER SLIDE BAR WITH HAND HELD SHOWER BARRA PARA LA REGADERA DESLIZABLE BRIZO® CON REGADERA DE MANO COULISSE DE DOUCHE BRIZO® AVEC DOUCHE À MAIN 72586 Model/Modelo/Modèle 88775s Series/Series/Seria Odin™ Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici.
PAGE 4
1 2 A. 7 6 2 5 1 4 3 3 PLACEMENT OF THE SLIDE BAR SUPPLY OUTLET INSTALLATION Minimum diameter for hole is 1" (25 mm) with a maximum of 1 1/2" (38 mm). Apply plumber's tape to threaded ends of 1/2" (13 mm) pipe nipple (not supplied) and thread into shower riser elbow. Place the supplied base (1) and gasket (2) behind the elbow (3). Screw the supply elbow onto the nipple making sure that the supply elbow outlet is in a downward facing position.
PAGE 5
3 B. 1 A. 2 1 24" 24 po (609.6 mm) 2 1 WALL BAR INSTALLATION B. Mark the place for drilling the holes for the lower post A. using mounting plate (1) as a guide. Mark, using a level in a vertical line from the lower hole, the placement of the upper post holes. Again, use mounting plate as a guide. Vertical distance is approximately 24" (609.6 mm). Note: Hole size will be determined by your use of just the screws or anchors and screws for installation. Drill holes for mounting of bottom post.
PAGE 6
C. B. 2 1 3 4 1 3 3 2 6 2 1 4 5 3 1 2 5 6 4 3 2 3 INSTALLATION OF THE SHOWER SET B. If anchors (1) are required for your installation, press anchors Connect the shower hose to the wall outlet (1) and the hand held piece (2), ensuring that the internal gaskets (3) are present in the shower hose nuts. Normal 1/2” rubber gaskets can be used. Place the conical nut (4) of the hose that is connected to the hand held piece, in the slide bar holder (5) and turn it to desired position.