BT Video Baby Monitor 7500 Lightshow User guide
Contents Welcome.................................................................. 3 Getting set up.......................................................... 4 Learn about your menu.......................................... 10 Learn about your Parent unit.................................. 12 Learn about your Baby unit.................................... 13 Baby unit (camera)................................................. 14 Using the Night Light.............................................
Welcome Thanks for buying this BT Baby Monitor. You’ll soon be able to relax knowing you can watch and listen to your baby’s every breath, gurgle and wriggle. But first things first. To get set up, just follow the steps over the page. Set-up only takes a few minutes. Then, you can learn all about your monitor and how to use it from page 10. Need some help? No problem – give us a call on 0808 100 6554*, or go to bt.com/producthelp.
Getting set up Place the charging dock near a power socket in the room where you’re going to be monitoring your baby most of the time. (Most people have their charging dock on a bedside table). 1 Using one of your two micro USB cables, plug one end into the power plug. 2 4 Need some help? Call 0808 100 6554* or go to bt.com/producthelp When does near become too far? The maximum range between your Parent and Baby units is about 300 metres outdoors and about 50 metres indoors.
Getting set up Plug the other end into the charging dock, then plug the power plug into the power socket and switch the power on. Tip You can also plug the USB cable directly into your Parent unit without needing to use the charging dock. Tip Pull the battery tab out of the Parent unit. Tip Remove this tab and charge batteries for 5 hours before use. 3 You can also charge your Parent unit using other micro USB cables. This can be handy when you’re away from home with your baby.
Getting set up Put your Parent unit on the dock to charge for at least five hours. 4 You can tell it’s fully charged when the is solid green. green battery icon on the screen Home 6 Need some help? Call 0808 100 6554* or go to bt.com/producthelp Important note about batteries A fully charged Parent unit will last about 6.5 hours with normal use. To speed up charging, charge the Parent unit when it’s switched off.
Getting set up 5 After the Parent unit has charged for five hours you’re ready to set up your Baby unit (camera). To get the best performance, place your Baby unit between one and two metres away from your baby. If you like, you can also attach the unit to a wall. See page 35 for how to do this. Make sure there’s enough slack in the power cable so the Baby unit can pan freely. 1-2 Metres Tip Point the Baby unit’s camera to the centre of the mattress or playpen. You can always adjust this later.
Getting set up Using your other micro USB cable, plug one end into the power plug and the other end into the Baby unit. Plug the power plug into the power socket and switch the power on. 6 Press and hold the power button for a second or two. The link light will flash green and the nightlight will light on and off. 7 8 Need some help? Call 0808 100 6554* or go to bt.
Getting set up 8 Press the power button to switch on your Parent unit. The Parent and Baby unit will link automatically and the Baby unit’s link light will turn solid green. Vol. Power Tip If you ever want to watch the set-up wizard again, tap Menu and then BT Help, then Introduction. Talk Mute The first time you switch on your Parent unit, a set-up wizard asks you to set the time and then shows you all your baby monitor’s features.
Learn about your menu Using your baby monitor Signal strength This will show the strength of your connection between the Parent and Baby unit. Quick access menu for Night Light, Lullabies and Lightshow More on page 16–21. Time You can set this in Settings. More on page 31. Feed Timer Set reminders for feeding time. More on page 22. Temperature The temperature of the room the Baby unit is in. Get alerts on changes of temperature. More on page 24. How do I leave the menu? Press .
Temperature at Baby unit This changes colour as the temperature changes – yellow is the optimum temperature, blue too cold, orange too warm and red too hot. More on page 24. Battery level More on page 6. Cry Alerts Hear when your baby’s crying. More on page 27. Settings Set tones, backlight and time. More on page 31. BT Help See the set-up wizard, reset settings and how to get more help. More on page 33. Home Returns to the live video from your Baby unit. Tap the screen anywhere to go to the menu.
Learn about your Parent unit Tips about talking Screen On/Off Press to turn your Parent unit screen on and off (sleep). Audio remains active when the screen is off. Volume Press to increase or decrease volume. To mute, press until the Mute light comes on. Remember, you won’t hear your baby through the Parent unit if you mute the volume. Vol. Vol. Power Power Press and hold for a second to turn your Parent unit on and off. Talk Mute Talk Press and hold to talk to your baby through the Parent unit.
Learn about your Baby unit Temperature sensor Temperature indicator light This changes colour as the temperature changes. Yellow is the optimum temperature, blue too cold, orange too warm and red too hot. Night Light Press to turn the Night Light on and off. Power Press and hold for 1 second to turn your Baby unit on and off. Link indicator light This is solid green when the Parent and Baby units are linked. It flashes green when it’s trying to link to a camera and flashes red when no camera is linked.
Baby unit (camera) How to name your camera 1 To change your camera name, tap Cameras and then Rename?. 1 2 Enter your baby’s name (up to eight characters) and tap Save. 14 Need some help? Call 0808 100 6554* or go to bt.
Baby unit (camera) How to pan, tilt and zoom your camera To zoom a camera, tap the screen and the Tap these to zoom in and out. and To pan or tilt a camera, tap the screen and Tap Tap and and will appear. will appear. to tilt your camera up and down. to pan your camera left and right. 15 Need some help? Call 0808 100 6554* or go to bt.
Using the Night Light A gentle night light in your baby’s room can give your baby comfort. 1 Tap the quick access menu . 1 16 Need some help? Call 0808 100 6554* or go to bt.
Using the Night Light 2 3 4 5 6 2 Choose the Night Light tab. Tip 3 Tap to turn your Night Light on/off. (The will glow yellow on the quick access menu when you return to the home screen.) 4 There are three brightness settings for the Night Light. Tap how bright you want your Night Light. You can also turn the Night Light on/off on the Baby unit – just press the button. 5 Tap to turn the timer on/off. Tip 6 Tap to set your timer.
Using Lullabies Music can entertain your baby or help them drift off to sleep. You can choose from Lullabies, Classical, Nature Sounds and White Noise. 1 Tap the quick access menu . 1 18 Need some help? Call 0808 100 6554* or go to bt.
Using Lullabies 2 4 3 6 2 8 5 Tap either arrow to scroll and choose the type of music you want from lullaby, classical, nature or white noise. 3 Tap either arrow to choose the track to play. 4 Tap to play the track. 5 Tap to adjust the Baby unit (camera) volume. 6 Tap to turn the timer on/off. When on, you’ll see a timer icon on the Lullabies tab and quick access menu. 7 Tap to set your timer. Then tap the + or - to set how long the music plays.
Using the Lightshow Your baby monitor has a soothing lightshow to help calm your baby and get them to sleep. 1 Tap the quick access menu . 1 20 Need some help? Call 0808 100 6554* or go to bt.
Using the Lightshow 2 5 3 4 2 Tap the Lightshow tab. Tip 3 Tap to turn your lightshow on/off. When on, the on the Lightshow tab and the quick access menu will glow. It will turn off automatically after 2 hours. If you would like it to run again, just tap On. 4 Tap to turn the timer on/off. You can also turn the lightshow on/off on the Baby unit – just press the button. 5 Tap the + or - to set the lightshow timer. It can run from 5 minutes up to 60 minutes.
Feed Timer How to set reminders for feeding time Babies like regular feeding times and a bit of routine. Your handy baby monitor can remind you of feeding times. 1 In Menu, tap Feed Timer. Tip If you just start your feed timer without changing any settings, its default setting is to alert you in two hours. The maximum alert time you can set is for an alert in nine hours and 59 minutes. 1 22 Need some help? Call 0808 100 6554* or go to bt.
Feed Timer Important If you turn off your Parent unit, you’ll need to restart your feed timer when you turn it on again. Length and frequency settings for alerts aren’t affected by turning off the Parent unit. 2 4 3 5 2 Tap when you want feed timer alerts. 3 Choose and tap the kind of alert you want. 4 Tap Start . When your feed timer is on, the numbers showing the time glow green. You can also see a countdown to the next alert on the home screen.
Temperature How to change the temperature alert settings Important Make sure your baby’s room is at a comfortable temperature. Your handy baby monitor will let you know if it’s getting too hot or too cold. The Baby unit’s thermometer is accurate to +/- 1°C. 1 In Menu, tap Temperature. Default settings The Baby unit’s default setting for temperature alerts is 15°C (and below) and 25°C (and above), based on UK Department of Health guidelines.
Temperature What happens if there’s more than one alert? 2 3 4 5 2 Tap if you want to change how you want your baby’s room temperature displayed (i.e. in Celsius or Fahrenheit). Its default is Celsius. 3 Tap 4 Tap if you want to adjust the temperature displayed. For example, you might want to do this if there’s a slight difference in temperature between what’s showing on the Parent unit and your central heating thermostat or other device. 5 Tap You’ll always see the latest alert on the screen.
Temperature During an alert, tap Dismiss to stop it or Settings to change it. Note A Too Warm alert will stop automatically after 30 seconds. 26 Need some help? Call 0808 100 6554* or go to bt.
Cry Alerts How to know when your child is making a sound Babies make all sorts of sounds, from gurgling and snuffling to chatting and crying. Cry alerts do exactly as they say. They won’t alert you to every little snuffle, but only when your child is making a loud noise. A cry alert only sounds when the Parent unit is on mute. 1 In Menu, tap Cry Alerts. 1 27 Need some help? Call 0808 100 6554* or go to bt.
Cry Alerts Important 2 If the screen’s off or in sleep mode, it’ll come on when there’s a cry alert. If your baby settles, a cry alert will stop automatically after 30 seconds. What happens if there’s more than one alert? 2 Tap the kind of alert you want. 28 Need some help? Call 0808 100 6554* or go to bt.com/producthelp You’ll always see the latest one on the screen. If you dismiss the latest alert you’ll see the previous one.
Cry Alerts During an alert, tap Dismiss to stop it or Settings to change it. If the screen alert is set to off, press any button on the Parent unit to dismiss the alert. 29 Need some help? Call 0808 100 6554* or go to bt.
Night vision The Baby unit has a night vision mode that allows you to monitor your baby in dark rooms. The Baby unit has infra red LEDs that are invisible to your baby so they don’t disturb or distract them. The night vision mode will automatically turn on when the ambient light drops and the room becomes dark. The image will turn to a black and white image as shown below: The night vision works best when the Baby unit is placed between 1 and 2 metres from your baby.
Settings How to set key tones, backlight and time, and calibrate screen All your main baby monitor settings are in one handy place on your Parent unit. 1 In Menu, tap Settings. 1 31 Need some help? Call 0808 100 6554* or go to bt.
Settings 2 3 4 5 2 Tap to set the sound or vibration you’d like when you tap your screen. 3 Tap to set how bright you’d like your screen. The default setting is for the Parent unit to automatically adjust brightness depending on the ambient light. There are five different levels of brightness, if you want to set this manually. 4 Tap 5 Tap to calibrate your screen. (You’ll see arrows around the screen when it needs calibrating, otherwise you shouldn’t need to calibrate it.) to set the time.
BT Help How to see the set-up wizard, reset settings and get help There’s lots of help, if you need it. 1 In Menu, tap BT Help. 1 33 Need some help? Call 0808 100 6554* or go to bt.
BT Help 2 3 4 2 Tap to see the set-up wizard. 3 Tap 4 Tap for the help website address (bt.com/producthelp), free helpline and software version number (you might need this if you contact us). to reset your Parent unit to its factory settings. 34 Need some help? Call 0808 100 6554* or go to bt.
Help and troubleshooting If you have any problems setting up or using your baby monitor, see if these common questions can help. How long does the Parent unit battery last? A fully charged Parent unit will last about 6.5 hours with normal use. To speed up charging, charge the Parent unit when it’s switched off. You can also charge the Parent unit and use it at the same time, but it’ll charge slower and take longer to fully charge. How do I replace the battery? You should only use a Lithium 3.7V 2500mAh 9.
Help and troubleshooting My Parent/Baby unit isn’t working. What should I do? Check that: 1. power cables are plugged in and switched on at the wall socket 2. batteries are installed correctly and fully charged 3. the units are turned on 4. the Parent unit isn’t too far from the Baby unit(s) (large obstructions or other electrical devices might affect the signal between the Parent and Baby unit). Sometimes unplugging the power cables, waiting about 20 seconds, and then plugging them back in can help.
Guarantee and returns Cleaning Your BT Video Baby Monitor 7500 units have a durable plastic casing that should keep their colour and finish for many years. To clean, use only a soft cloth slightly dampened with water or a mild soap. Do not use too much water or cleaning solvents. Within the 12-month guarantee period Before returning your equipment, please read Help and troubleshooting starting on page 35 or contact us on 0808 100 6554*. There’s also more help at bt.com/producthelp.
Guarantee and returns How to recycle your equipment Your baby monitor is classed as electrical or electronic equipment, so DO NOT put it in your normal rubbish bin. It’s all part of the Waste Electrical and Electronic Equipment (WEEE) Directive to recycle products in the best way – to be kinder to the planet, get rid of dangerous things more safely and bury less rubbish in the ground.
For a Better Future We’re always looking to make our products last longer and use less power, so we don’t have such a big impact on the environment. To find out about what we are doing, visit bt.com/betterfuture Offices worldwide The services described in this publication are subject to availability and may be modified from time to time. Services and equipment are provided subject to British Telecommunications plc’s respective standard conditions of contract.