User guide
38
If you experience any problems, please call the Helpline on
Answering machine
The pre-set Answer and Record outgoing
message, that allows your caller to leave a
message, is “Hello, your call cannot be taken at
the moment, so please leave your message after
the tone”.
Your Answer and Record outgoing message will
replace the pre-recorded message.
To reinstate the pre-recorded messages,
delete your own recorded outgoing message,
see below.
The pre-set Answer Only outgoing message,
where callers hear an announcement but cannot
leave a message, is “Hello, your call cannot be
taken at the moment and you cannot leave a
message, so please call later”.
When recording your Answer Only message,
remember to advise your caller that they will not
be able to leave a message.
Your own Answer Only message will replace the
pre-recorded message.
Outgoing messages
The outgoing message is the message a caller rst hears when the answering
machine picks up their call. There are 2 pre-recorded outgoing messages to
choose from (see note left), or you can record your own.
1. Press Menu. Scroll
to AnSwer MAChine. Press SeleCt.
2. Scroll
to outgoing MSg and press SeleCt.
3. AnSwer & reCorD is displayed. Press SeleCt or scroll
to AnSwer only and press SeleCt.
4. Scroll
to reCorD ogM and press SeleCt.
5. Speak your announcement after the long beep. Press Stop to stop recording.
Your message is played back.
1. Press Menu. Scroll
to AnSwer MAChine. Press SeleCt.
2. Scroll
to outgoing MSg and press SeleCt.
3. AnSwer & reCorD is displayed. Press SeleCt or scroll
to AnSwer only and press SeleCt.
4. plAy ogM is displayed. Press SeleCt to play the message.
5. Press BACk to return to the previous menu level.
1. Press Menu. Scroll
to AnSwer MAChine. Press SeleCt.
2. Scroll
to outgoing MSg and press SeleCt.
3. AnSwer & reCorD is displayed. Press SeleCt or scroll
to AnSwer
only and press SeleCt.
You can delete your own recorded OGM.
This will automatically reinstate the
pre-recorded message.
You cannot delete the pre-recorded message.