User Manual PULSE10-V0 PULSE12-V0 Component Subwoofers
Owners Manual Congratulations on purchasing your VIBE subwoofer. Please read this manual in order to fully understand how to get the best results from this product and ensure that all advice on how to look after the product is followed. Thank you for buying VIBE, we hope you enjoy listening to your product as much as we enjoyed creating it. Caution Do not expose this product to damp or moisture - doing so may result in damage to the product.
Limited Warranty All VIBE products carry a full 12 month warranty, valid from the date of the original receipt and proof of purchase (UK only). The online warranty card should be completed within seven days of the original purchase date. The original receipt and packaging should be retained for this twelve month period. If the product develops a problem at any stage during the warranty period, it should be returned to the point of purchase in its original packaging, and complete with no items missing.
Wiring Connections Please follow the wiring diagram below and ensure that correct polarity is observed as incorrect wiring may cause the subwoofer to be out of phase with the rest of the system and result in a loss of bass.
Run In Procedure VIBE recommends that you follow the run in procedure for the subwoofer detailed below. When your subwoofer is used for the first time, like most brand new items it is naturally very stiff and rigid. It will take time for the moving parts of this subwoofer to loosen up before the subwoofer will be ready to deliver its full potential. For the first 30 hours it is recommended that you play the subwoofer at low to medium volumes, gradually increasing the volume level as time progresses.
Specification Model PULSE10-V0 Speaker Size 10” (274mm) 12” (323mm) 1050W/350W 1050W/350W 85dB 86dB Peak/RMS Power Sensitivity Frequency Response Impedance Voice Coil Magnet weight PULSE12-V0 30Hz - 1kHz 25Hz - 850Hz 4Ω 4Ω 2” 4 layer 2” 4 layer 40oz 40oz Magnet dimensions 5.3” (137mm) 5.3” (137mm) x 0.8” (20mm) x 0.8” (20mm) Mounting Depth 5.3” (133mm) 5.6” (142mm) Mounting Diameter 9.1” (230mm) 10.9” (277mm) Enclosure Volume Vented 1 - 2ft3 Vented 1.5 - 2.
UK Technical Enquiries Call 09067031420 Calls cost 50p per minute. Call costs correct 01/02/12 Hours of business 9.00am - 5.30pm GMT Monday - Friday. All calls are recorded for training purposes. MIDBASS Distribution PO Box 11000 B75 7WG International Technical Enquiries For international technical support please contact the distribution agent for your country. Please visit www.vibeaudio.co.
Designed and engineered in England www.vibeaudio.co.uk www.youtube.com/vibeaudio www.facebook.com/vibeaudio www.twitter.
