ENGLISH USER MANUAL OPERATION MANUAL Thank you for buying this BRITEQ product. To take full advantage of all possibilities and for your own safety, please read these operating instructions very carefully before you start using this unit. FEATURES This unit is radio-interference suppressed. This product meets the requirements of the current European and national guidelines. Conformity has been established and the relevant statements and documents have been deposited by the manufacturer.
ENGLISH USER MANUAL SAFETY INSTRUCTIONS: CAUTION: To reduce the risk of electric shock, do not remove the top cover. No user-serviceable parts inside. Refer servicing to qualified service personnel only. The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use or the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
ENGLISH USER MANUAL Important: Never look directly into the light source! Don’t use the effect in the presence of persons suffering from epilepsy. DESCRIPTION: CONTROL PANEL: 1. DMX LED: is lit while the unit receives a DMX-signal. Blinks while performing a software upgrade. 2. W-DMX LED: is lit when the unit receives a wireless DMX-signal and blinks fast while pairing (linking to a wireless transmitter). The W-DMX led blinks slowly when the transmission is lost. 3.
ENGLISH USER MANUAL DMX Address Used to set the start address in a DMX setup. Select “DMX address” and press ENTER. Use DOWN / UP buttons to change the DMX512 address. Press the ENTER button to save. To return the previous menu, press the ESC. button. Reset Used to reset the unit. Press the ESC. button and select the “Reset” submenu. The display shows “Are you sure?” Press ENTER to confirm or ESC. to discard. To return the previous menu, press the ESC. button again.
ENGLISH USER MANUAL Pan angle Range Used to set the maximum pan range while not in endless pan mode. Select “Pan angle Range” and press ENTER. Use DOWN / UP buttons to select 360° (1 rotation) or 720° (2 rotations). Press the ENTER button to save. To return without any change or go to a previous menu, press the ESC. button.
ENGLISH USER MANUAL Display options Used to adapt different settings for the LCD display. Select “Display options” and press ENTER. Use DOWN / UP buttons to adapt the display settings: Language: setup menu can be displayed in English or French. Display Mode: display can be automatically shut off or not Auto Off: after 30s the display goes dark until you press a button. On Always: display is always lit.
ENGLISH USER MANUAL Operation Mode This submenu is used to select in which operation mode the unit should work. Select the “Operation Mode” submenu and press ENTER. DMX Operation Select this option if the projector should be controlled by DMX. Select “DMX Operation” Press the ENTER button to confirm. To return to a previous menu, press the ESC. button. Sound operation Used to select different internal sound activated programs. Select “Sound Operation” and press ENTER.
ENGLISH USER MANUAL OVERHEAD RIGGING Important: The installation must be carried out by qualified service personal only. Improper installation can result in serious injuries and/or damage to property. Overhead rigging requires extensive experience! Working load limits should be respected, certified installation materials should be used, the installed device should be inspected regularly for safety.
ENGLISH USER MANUAL HOW TO SET THE RIGHT START ADDRESS: Refer to the previous chapter (DMX-512 address setting) to learn how to set the start address on this unit. The start address of each unit is very important. Unfortunately it is impossible to tell you in this user manual which starting addresses you have to use because this completely depends on the controller you will use… So please refer to the user manual of your DMX-controller to find out which starting addresses you must set.
ENGLISH USER MANUAL 11 28 Pan 16 bit 12 29 Pan Rotation 13 14 30 31 Tilt Tilt 16 bit 15 32 Tilt Rotation 16 33 Pan/Tilt Speed 17 34 Control function 000-255 000-127 128-191 192-255 000-255 000-255 000-127 128-191 192-255 000-255 000-007 008-037 038-067 068-097 098-127 128-157 158-187 188-217 218-247 248-255 Pan in 16 bit precision Pan Stop Pan Speeds in CCW from slow to fast Pan Speeds in CW from slow to fast Tilt(0~270°) Tilt in 16 bit precision Tilt Stop Tilt Speeds in CCW from slow t
ENGLISH USER MANUAL WIRELESS DMX (OPTIONAL MODULE) The standard “TORNADO 7” is not equipped with wireless DMX ! ® If needed you can order an optional wireless DMX module (Wireless Solution from Sweden) to be installed ® in your projector. Installation of the wireless module will be done by Briteq or its distributor in your country.
ENGLISH USER MANUAL The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty surroundings can cause greater accumulation of dirt on the unit’s optics. Clean with a soft cloth using normal glass cleaning products. Always dry the parts carefully.
WWW.BRITEQ-LIGHTING.COM Copyright © 2014 by BEGLEC NV ‘t Hofveld 2C ~ B1702 Groot-Bijgaarden ~ Belgium Reproduction or publication of the content in any manner, without express permission of the publisher, is prohibited.
