User Manual
Table Of Contents
ENGLISH USER MANUAL
Briteq
®
5/12 BT-AKKULITE IP MINI
[SETUP MENU]:
MAIN MENU:
• To select any of the menu options, press the [MENU] button.
• Use ▲ and ▼ button to choose the desired menu option.
• Select the function with the [ENTER] button. The display will blink.
• Once the required menu option is selected, press the [ENTER] button to select.
• Press the [MENU] button to return to running mode.
[Addr] DMX 512 Address setting
Used to set the start address in a DMX setup.
• Press the [MENU] button.
• Press the ▲ or ▼ button until [Addr] is shown on the display.
• Press the [ENTER] button to select. The display starts blinking.
• Use ▲ and ▼ buttons to change the DMX512 address.
• Once the correct address is shown on the display, press the [ENTER] button to
confirm.
[CHnd] Channel Mode
The unit has 5 different channel modes, refer to the DMX-chart to see the
differences.
• Press the [MENU] button.
• Press the ▲ or ▼ button until [CHnd] is shown on the display.
• Press the [ENTER] button to select. The display starts blinking.
• Use ▲ and ▼ buttons to select one of the available channel modes.
• Once the mode is selected, press the [ENTER] button to confirm.
[SLAU] Slave Mode
The first projector in the chain should be set , all the other projectors have to be in
Slave mode.
• Press the [MENU] button.
• Press the ▲ or ▼ button until [SLAU] is shown on the display.
• Press the [ENTER] button to select. The display starts blinking.
• Then press [ENTER] to confirm the slave mode.
[SP--] Speed Mode
• Press the [MENU] button.
• Press the ▲ or ▼ buttons until [SP--] is shown on the display.
• Press the [ENTER] button to select. The display starts blinking.
• Use ▲ and ▼ buttons to select the desired speed.
[Pr--] Preset Selection Mode
Used to choose to select one of the preprogrammed colors or fades when
used in standalone or master/slave mode. All projectors will always show an
identical output.
• Press the [MENU] button.
• Press the ▲ or ▼ buttons until [Pr--] is shown on the display.
• Press the [ENTER] button to select. The display starts blinking.
• Use ▲ and ▼ buttons to select one of the preprogrammed colors or shows.
(Pr01…Pr35)
• Once the desired color or show is selected, press the [ENTER] button to confirm.
[ASC-] Mode
Used to choose the desired color changing show.
• Press the [MENU] button.
• Press the ▲ or ▼ buttons until [ASC-] is shown on the display.
• Press the [ENTER] button to select.