User Manual
Table Of Contents
ENGLISH USER MANUAL
Briteq
®
3/12 BT-AKKULITE IP MINI
DESCRIPTION:
1. Handle: to easily carry the projector.
2. IR sensor: receives signals from the IR-remote
3. [Power ON/OFF] button : push this button to turn the projector ON or OFF
4. Projector base.
5. Knob used to fasten the projector in a desired angle between 0° and 25°.
6. Lens in front of RGBWA 10W LED
7. Rubber foot.
8. Valve: removes condensation and moisture from the projector.
9. Display: used to browse the setup menu
10. [Wireless DMX] indicator : shows whether the wireless function is ON or OFF.
11. [Wireless Mode] indicator : shows the status of the wireless DMX (Receiver or transmitter)
12. Battery capacity indicator: shows the statusof the battery
13. 4 digit LCD display
14. [Wireless ON/OFF] button : push this button to switch ON or OFF the wireless transmitter/receiver in
the projector.
15. [MENU] button: push this button to select the desired topic in the menu
16. [ENTER] button: push this button to confirm the selected setting
17. ▲ button : push this button to go up in the menu
18. ▼ button : push this button to go down in the menu
19. [ID-Set] button: used to connect the projector wireless to another projector. (see chapter: [SETUP
MENU])