ENGLISH Operation Manual Other languages can be downloaded from: WWW.BRITEQ-LIGHTING.COM Version: 1.
ENGLISH USER MANUAL OPERATION MANUAL Thank you for buying this Briteq® product. To take full advantage of all possibilities and for your own safety, please read these operating instructions very carefully before you start using this unit. FEATURES • • • • • • • • • • • Battery operated outdoor LED-projector, based on 4pcs 10Watt RGBWA-LEDs. Beam angle = 17° Projection angle can be adjusted over 25° (vertical to horizontal) Outdoor use: IP65 rating.
ENGLISH USER MANUAL SAFETY INSTRUCTIONS: CAUTION: To reduce the risk of electric shock, do not remove the top cover. No user-serviceable parts inside. Refer servicing to qualified service personnel only. The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use or the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
ENGLISH USER MANUAL DESCRIPTION: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. Handle: to easily carry the projector. IR sensor: receives signals from the IR-remote [Power ON/OFF] button : push this button to turn the projector ON or OFF Projector base. Knob used to fasten the projector in a desired angle between 0° and 25°. Lens in front of RGBWA 10W LED Rubber foot. Valve: removes condensation and moisture from the projector.
ENGLISH USER MANUAL ELECTRICAL INSTALLATION Important: The electrical installation should be carried out by qualified personal only, according to the regulations for electrical and mechanical safety in your country. Note: In the explanations below we assume that you will operate the projectors with the internal battery which is already fully charged. If you want to use them with a mains cable, simply connect all projectors to the mains using the supplied power cable.
ENGLISH USER MANUAL [SETUP MENU]: MAIN MENU: • To select any of the menu options, press the [MENU] button. • Use ▲ and ▼ button to choose the desired menu option. • Select the function with the [ENTER] button. The display will blink. • Once the required menu option is selected, press the [ENTER] button to select. • Press the [MENU] button to return to running mode. [Addr] DMX 512 Address setting Used to set the start address in a DMX setup. • Press the [MENU] button.
ENGLISH USER MANUAL • Use ▲ and ▼ button to select one of the available shows (AC00…AC15) • Once the desired show is selected, press the [ENTER] button to confirm. [FAdE] Mode Used to choose a color fading show • Press the [MENU] button. • Press the ▲ or ▼ buttons until [FAdE] is shown on the display. • Press the [ENTER] button to select. The display starts blinking. • Use ▲ and ▼ button to select a value between [FA00] (fast fading) and [FA15] (slow fading).
ENGLISH USER MANUAL [SoUA] Sound Mode Used to make shows working on sound or not. • Press the [MENU] button. • Press the ▲ or ▼ buttons until the display shows [SoUA]. • Press [ENTER] button to select. The display starts blinking. • Press [ENTER], the projector is now working in sound mode. If you want to go back to normal running mode: press the [MENU] button. [Led] Mode Led of10-30-60-90 : display turns off after 10-30-60 or 90 seconds. • Press the [■] button.
ENGLISH USER MANUAL [SETUP FOR WIRELESS OPERATION] Each unit has a wireless DMX transceiver on board. This means that every unit can be transmitter or receiver. To set up the system, you first need to assign each receiver to the universe (transmitter) it should work with. VERY IMPORTANT THINGS TO KNOW BEFORE USE Before you start using these wireless DMX units, you should know about the following some basic information.
ENGLISH USER MANUAL OPERATING INSTRUCTIONS A. Standalone 1unit: • Select one of the automatic modes or select a fixed color • Select the static or sound control mode • Refer to chapter [SETUP MENU] to learn how to make the previous settings. B. Two or more units in master/slave setup: • Set the slave mode for each projector: the first one has to be put in DMX mode or in a show mode (for example : [FAdE]) • Connect all units to the mains.
ENGLISH USER MANUAL DMX CHARTS LEDc-Mode: all pixels working together in RGB + MASTER DIM/SOUND/STROBE DMX DMX-value function remarks Channel 1 000-255 Red (0-100%) 2 000-255 Green (0-100%) 3 000-255 Blue (0-100%) 000-190 Master dimmer 000=0% ~ 190=100% (full open) 191-200 Sound control (7 colors) Audio sensitivity: 191=low ~ 200=high 4 201-247 Strobe Increasing speed: 201=slow ~ 247=fast 248-255 Master dimmer @ 100% Master dimmer is full open Mode 4CH: DMX Channel 1 2 3 4 Mode 5CH: DMX Channel 1 2 3 4
ENGLISH USER MANUAL Mode 10CH: DMX DMX-value Channel 1 000-255 2 000-255 3 000-255 4 000-255 5 000-255 6 000-255 000-014 7 015-255 000-031 032-063 064-095 096-127 8 128-159 160-191 192-223 224-255 9 000-255 10 000-005 006-055 056-105 106-155 156-205 206-255 function Master Dimmer 0% - 100% Red color dimmer Green color dimmer Blue color dimmer White color dimmer Amber color dimmer Open Strobe Slow to fast Open Close-open Open-close Open-close-open (white) Color fading Open-close-open (colors) Color cha
ENGLISH USER MANUAL SPECIFICATIONS This unit is radio-interference suppressed. This product meets the requirements of the current European and national guidelines. Conformity has been established and the relevant statements and documents have been deposited by the manufacturer. This device was designed to produce decorative effect lighting and is used in light show systems.
