FEDERAL COMMUNICATIONS COMMISSION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection.
“Furor Vulcan B Graphics Accelerator Card Hardware Features of Vulcan 8 2 1.1 Featuring . General Features 2D Acceleration 3D Acceleration Video Acceleration Host Interface Memory System Technology 12 Function Block Diagram. Software Features of Vulcan B 2.1 Driver Installation General Notice Windows NT4 Users Windows 95/98/NT5 Users 2.2 Windows 95/98/NTS5 Installations 2.3 Windows NT4 Installation Information and Support.
Forfeiture Vulcan B Graphics Accelerator Card “70 Hardware Features of Vulcan B Wm 3Dfx 2D/3D Graphics & Video Accelerator 1.1 Featuring: General Features « Fully integrated 128-bit VGA/2D/3D/ Video Accelerator o Ultimate 3D experience with 100 Megapixel and 4 Million meaninglessness 3D performance « No-compromise 3D image quality at frame rates » Optimized for software DVD acceleration « High-resolution 1600x1200 $5Hz with a 230MHz RAMADA « Supports 16MB GRAM frame buffer © PCP and PCP rev 1.
“Fi4.70° Vulcan B Graphics Accelerator Card 2 firmware Features of Vulcan B OS Driver support Windows 95 VxD display driver Windows 98 / Windows NT 5.0 WDM (Win 32) display driver Windows NT 4.0 display driver Supporting Application A Pis: Glide, Direct 3D, Opening ICD 2.1 Driver Installation Before you start, please carefully read the following technical advice to avoid hardware and software compatibility problems. 1. General Notice : 1.1.
mma ] én TOP Vulcan B Graphics . Accelerator Card «Triple 512x8 color lookup tables with separate gamma correction for video and graphics Host Interface « High performance AGP interface including optimized support for side band addressing and BE us « PCI v2.
wt / mirror Vulcan B Graphics Accelerator Card game should be configured properly per your VGA card. For example, the VIA MVP-based ma inboard driver requires installation in below order: 1. Microsoft USB Supplement program VIA IRQ Router program . VIA AGP (VxD) driver “VIA IDE bus-master (Ultra DAM-33) driver This driver is installed twice. The first, copying driver into Windows system and the second, setting up driver mode for each IDE drives. APC driver (AC PI Power Management) .
Procedure Vulcan B Graphics Accelerator Card 2. Fresh Installation NOTE: Complete Steps 1 before removing your existing 2D card. 1). Before removing your existing 2D card switch the video driver to Standard VGA. Click Start, Control Panel. Double-click on Display. Select 640X480 and 16 colors. Accept the changes. 2) Power off the system and remove your existing 2D card. 3) Install the Vulcan B Card in a free AGP or PCI Slot 4) Power on the system and verify that video appears during POST.
wg ! snowdrop Vulcan B Graphics Accelerator Card 6) When asked to choose a device, select "View Top Vulcan B” 7) You may then be prompted to insert the Vulcan B Driver Disk. Enter the path you specified in Step 5 again. 9) Windows will copy the drivers. Reboot the system when prompted. 10) Install Direct X 6 2.3 Windows NT4 Installation 1. Installation Requirements Windows NT 4.
Turboprop Vulcan B Graphics Accelerator Card “ "Information and Support +. Internet Support If you need more information about View Top series products, please visit our Internet website: The most update driver and BIOS of View Top product are also available from the Download page of our website at htm Complete hardware and software information about 3Dfx Voodoo series chip sets are available from the official 3Dfx website at httpe//wew 3dfs.
