0
Table of Content 1. IMPORTANT INFORMATION ..................................................................................................... 2 1.1 Important Safety Notes........................................................................................ 2 1.2 Federal Communications Commission Interference Statement........................... 3 2. INTRODUCTION .................................................................................................................... 5 2.1 Package Content.....
1. IMPORTANT INFORMATION 1.1 Important Safety Notes z z z Please read all instructions before installing and operating this product. Please keep all instructions for later reference. Please follow all warnings and instructions marked on the product. z For safety reasons, when the device is powered on, the venting holes should remain uncovered. Unplug the Powerline device from the wall outlet before cleaning. Use a dry cloth for cleaning. DO NOT use liquid cleaners or aerosol cleaners.
1.2 Federal Communications Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized. This device has also been evaluated and shown compliant with the IC RF Exposure limits under mobile exposure conditions. (antennas are greater than 20cm from a person's body). Canada, avis d'Industry Canada (IC) Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003 et RSS-210.
2. INTRODUCTION 2.1 Package Content Two PLC Devices Two Ethernet Cables 2.2 Product Overview The Powerline Ethernet Adapters take advantage of your home’s existing electrical wiring to build high speed network connection for surfing website, video streaming, online gaming or any bandwidth applications. Simply plug them to AC outlet and instantly establish powerline network. It means there is no IP configuration or additional wires required.
2.2.1 Button/LED Descriptions Button/LED Description On: Powered Blinking: (1) Rebooting or (2) The device is sitting at a network node for interfacing with another network Off: powered off ON: Ethernet connection detected. Blinking: Network transaction. OFF: No Ethernet connection detected. ON: PLC connection detected. Blinking: 1. Fast : 100Mbps > Powerline data rate > 60Mbps. 2. Normal : 60Mbps > Powerline data rate > 10Mbps. 3. Slow : 10Mbps > Powerline data rate.
3. HARDWARE INSTALLATION The powerline device takes advantage of your home’s existing electrical wiring to build high speed network connection for Internet access, HD video streaming, online gaming or any other bandwidth applications. 3.1 Application 1 – Provide Network Connection for Your Networked Devices Provide Internet connection for network compatible devices such as PC, Blu-Ray player, and cable box in any room at home. 3.
4. ENCRYPTED PLC NETWORK 4.1 Create a Private Encrypted PLC Network Group The Powerline bridges are compliant HomePlug AV specification. Every ‘HomePlug AV’ compliant PLC device that has the same default network name, “HomePlug AV”, is capable of communicating with other “HomePlug AV” devices. This is so called the “Public Network”. Two or more powerline devices under the same network can communicate with one another.
Step II: Join to Other Network Group 1. Press GROUP button of device A for 2 to 3 seconds (make sure POWER LED starts blinking). 2. Press GROUP button of device B for 2 to 3 seconds (make sure POWER LED starts blinking). The device B which has cleared its group attribute will join to the device A which has not. This step makes device A and B are under the same encrypted network.
5. ENHANCE PLC PERFORMANCE While Powerline device delivers data over the existing electrical wiring in the house, the actual performance may be affected by electrical noises or the length of the wiring. To improve PLC performance, please refer to below recommendations while placing the Powerline device. AC Outlets Connection - Avoid connecting PLC device to an uninterruptible power supply (UPS) or backup power supply device. For best results, connect the adaptors directly to a wall outlet is recommended.
Connection via Power Strip If user intends to connect the PLC device via power strip, please follow below reference for better performance: - Make sure the power strip does not support a noise filter or a surge protector. Electrical Interference Some household appliances may produce noise emission. If noise emission is spread over the electrical wiring it will affect PLC performance in the house.
6.
