User manual

Instructions for Installation & Use - Series No. JS8A/2010

Consult the vehicle owner’s handbook for location of anchorage ttings or anchorage points and the

possible use of spacers. Some vehicles may have an anchor tting tted by the vehicle manufacturer.

If anchorage points cannot be found refer to car manufacturer or local child restraint tting station or

trafc authority for optimum position of anchorage point and the use of spacers.

UPPER ANCHORAGE STRAP

IMPORTANT INSTALLATION NOTE:

In some vehicles the anchor tting in the rear vertical panel can only be installed in one way. Please

refer to vehicle owner’s handbook or a child restraint tting station for correct method.

INSTALLATION OF CAR ANCHOR FITTING

THE ATTACHMENT CLIP COVER MUST ALWAYS BE USED AS IT PREVENTS THE RISK OF

INCORRECT FITMENT OF THE ATTACHMENT CLIP TO THE ANCHOR FITTING. ALWAYS ENSURE

THAT THE ATTACHMENT CLIP IS CORRECTLY ENGAGED TO THE ANCHOR FITTING AND NOT

HOOKED OR FITTED TO ANY OTHER OBJECT BEFORE EACH USE OF THE RESTRAINT. THIS

IS ESPECIALLY IMPORTANT IN VEHICLES SUCH AS STATION WAGONS, VANS, HATCH BACKS

OR VEHICLES WITHOUT A FIXED PARCEL SHELF, SINCE THE ANCHOR POINT IS USUALLY NOT

VISIBLE.

IMPORTANT: