User manual

Instructions for Installation & Use - Series No. JS8A/2010

HOW TO INSTALL WITH A CHILD HARNESS

BOOSTER MODE

WITH CHILD HARNESS

C. Feed the adult belt (lap belt or converted lap/sash) through the harness loops, ensuring that the

cross strap loop does not disconnect. Also ensure there are no twists in the harness, cross strap

and seatbelt.

Thread the converted lap-sash seatbelt or lap seatbelt through the harness strap loops as shown.

Harness

strap

loops.

Converted

lap-sash

seatbelt.

Lap belt.

D. Engage the seatbelt tongue to the

buckle and adjust the seatbelt to sit

rmly around the child’s hips and

thighs. The seatbelt buckle should

be located as low as possible

below the child’s hip. If using a

lap-sash seatbelt and gated slide

you will need to adjust it so that the

seatbelt is rm on the child’s thighs

and the gated slide is close to the

child but not touching the child.

The gated slide

needs to be close

to the child but not

touching the child.

The gated slide

needs to be behind

the armrest.