User manual

Instructions for Installation & Use - Series No. JS8A/2010

HOW TO SETUP

4 Slots

ADJUSTING THE CROTCH BUCKLE HEIGHT

The crotch buckle height is adjusted by threading the 3 bar anchor plates

into extra slots to shorten the buckle height. The seat has the crotch

straps tted in position when supplied. Position 1 is generally used with

the built-in harness or toddler mode.

A. Remove the seat from car.

B. Lift trim cover to reveal crotch strap slot.

C. Turn the crotch 3-bar slide and push through each slot as shown right

until the crotch strap assembly is free from the seat.

D. Insert crotch strap through restraint slot which will position crotch strap level with the child’s crotch

and feed back through other slot as shown right.

E. For Toddler mode use the adjustment shown in illustration 1. shown below. If this is too high then

one of the other positions may be suitable

When replacing the cover, ensure none of the harness straps are twisted and that all straps are

secure by pulling each harness strap.

IMPORTANT :

1. Longest Length

for Toddler mode with

built-in harness and

largest child in Booster

3. Mid Length

for Booster Mode-

Mid size Child

2. Shortest Length

for Booster Mode-

Smallest Child

3 Bar Anchor

Slot

FORWARD FACING

WITH BUILT-IN HARNESS