User guide

47
Replacing the Cover
Care and Maintenance
Move the head restraint to the 1
highest position.
Remove the screw to unlock the *
head restraint adjuster. Store the
screw in a safe place.
Fit the cover around the head 2
restraint.
Be careful not to damage the *
energy-absorbing foam.
Fit the bottom of the cover over the
3
lower part of the child seat shell.
Pull the harness straps through the
4
appropriate holes in the cover.
Fit the elastic around the cup
5
holders on the bottom of the child
seat shell.
Move the head restraint to the
6
lowest position. Ensure that harness
slots in cover, head restraint and
harness adjuster are aligned and
route the harness straps through the
harness slots and harness adjuster.