User guide

32
This seat can be used in booster mode with children who stand 42” – 60”
(106.7 – 152.4 cm) in height and weigh more than 40 lbs (11.3 kg). Britax
recommends using harness mode to 80 lbs (36.3 kg). See the Child Size:
Height and Weight Limitations section on page 4 for information on
when your child has outgrown harness mode.
Switching Between Modes
Harness to Booster Mode
To remove the harness and buckle:
Loosen the harness.1 Unhook both harness straps from 2
the yoke.
Do not remove the HUGS™ *
pads or chest clip.
Store the yoke on the belt shield.
3
Pull the shoulder straps of the 4
harness from the slots.
Harness Mode: Installing Your Child Seat