Instruction manual

Instructions for Installation & Use - Series No. 4900/A/2010
TO REMOVE CHILD FROM
HARNESS AND SEAT
Disengage seatbelt tongue and buckle,
remove the lap portion of seatbelt from the
SLIDEGUARD™clip (where provided) and remove
Child Harness and belt from child. When Booster
is not being used, secure in position, by engaging
seatbelt over the booster seat or store in a safe
place.
Once the child is too large for the booster seat,
the child harness can still be used and is a
signicant safety device for children in a lap only
seatbelt. Refer to the child harness instruction
book.
When Booster is not being used, secure in position, by engaging seatbelt over the booster
seat or store in a safe place.
DO NOT LEAVE CHILDREN UNATTENDED IN THE CAR.
:
30
Lift child harness strap
over child’s head.
HOW TO INSTALL WITH A CHILD HARNESS
IMPORTANT: ALWAYS USE THE SLIDEGUARD™ CONVERTER
IMPORTANT:
Use seatbelt to hold the child
restraint when not in use.
NOTE: It maybe easier to unthread the car
seatbelt out of the loops before lifting the
child harness over the child’s head.