Instruction manual

Instructions for Installation & Use - Series No. 4900/A/2010
FITTING THE GATED SLIDE TO THE LAP-SASH SEATBELT
26
HOW TO INSTALL WITH A CHILD HARNESSHOW TO INSTALL WITH A CHILD HARNESS
B. The two straps should slide freely in the Gated Slide
slot.
B
A. Hold the lap and sash straps together and fold as
shown below. Slide the inner strap into the Gated Slide
followed by the outer strap.
Faces
towards
Child
Inner
Strap
Outer
Strap
A
There may be one of two types of Gated Slides available
as shown below provided with the Child Harness. Only
use the Gated Slide provided with the Child Harness. If
curved Gated Slide, then the belt route through this can
only go one way as shown.
Before using the Protecta PLUS™ Harness with a Lap-
Sash Seatbelt, you need to convert the seatbelt to a Lap
Seatbelt by using the Gated Slide provided.
IMPORTANT: Face the hollow side of the Gated Slide
towards the child. Do not use Gated Slide for any other
purpose.
Always ensure the Hollow
side is towards child
CurvedFlat