Instruction manual

Instructions for Installation & Use - Series No. 4900/A/2010

USING WITH A CHILD HARNESS (PURCHASED SEPARATELY)

This booster seat is only suitable for use with Safe-n-Sound™Protecta PLUS™Harness

Series 220/2010 or Babylove EzyGo Harness™ Series BL220/2010. Refer to the instruction

book supplied with the Child Harness for full details of using and installing the Child

Harness. When installing the Child Harness into the vehicle and booster seat, connect the

upper anchorage strap to the VERSATETHER™ Catch on the Booster Seat’s upper tether

strap (as shown below).

If required, use the extension strap supplied with the child harness for all other instances to

attach the harness to anchor points in the luggage area such as the vehicle oor or ceiling.

Not suitable for most other styles of child safety harnesses.

INSTALLING SAFE-N-SOUND PROTECTA PLUS™CHILD

HARNESS INTO VEHICLE WITHOUT EXTENSION STRAP

NOTE: Do not use the VERSATETHER™catch on the Child Harness Clip (1).

VERSATETHER™catch (2) is only for use with a Child Harness.

Hook the Child Harness attachment

clip (1) onto VERSATETHER™

Catch (2). Then hook attachment

clip (3) onto anchor tting. Ensure

that none of the straps are twisted

and not passing over any sharp

edges.

1. Attachment Clip from Child Harness.

2. VERSATETHER™ Catch.

3. Booster seat Attachment Clip.

4. Anchor Fitting in the car.

Child Harness Attachment Clip attaches to the

VERSATETHER™ Catch

HOW TO INSTALL WITH A CHILD HARNESS