Instruction manual

Instructions for Installation & Use - Series No. 4900/A/2010
17
C. Engage seatbelt buckle and tongue
ensuring there are no twists in
the belt. If the seatbelt buckle is
adjustable, adjust the buckle as low
as possible away from the child.
Note: In some vehicles, the vehicle
headrest may need to be raised or
even removed to allow the booster
seat to sit correctly, the vehicle
headrest may also interfere with
the routing of the upper anchorage
strap. If removed, store the vehicle
headrest in a safe place.
D. Adjust lap and sash portion of
seatbelt rmly but comfortably
across the child’s lap and chest.
E. Fit the SLIDEGUARD™clip to the lap
belt. Ensure the bottom edge of the
clip is in line with the thighs (see
page 14 for adjustment steps).
F. If using an Inertia Reel Retractor
seatbelt, adjust the lap portion of
the seatbelt rmly around the child
and restraint, then let the slack sash
portion retract up into the sash
retractor.
G. Fit the SLIDEGUARD™clip with the
logo facing forward to the Lap Belt.
ALWAYS USE THIS DEVICE
HOW TO USE
Engage buckle
Ensure both
lap and sash
belts are in
recess area
Ensure lap
portion is
in recess
area
Sash belt
across the
chest and
through the
sash guide
G