User guide

30 31
Adjusting the Buckle Strap
• Unbuckle the harness by
pressing the red button in
the center of the buckle and
sliding both harness tongues
out of the buckle.
• Locate the buckle strap
retainer on the bottom of the
infant car seat.
• Pull the buckle strap retainer
away from the seat to loosen.
• Turn the buckle strap retainer
so that the short side will go
through the slot in the infant
car seat shell and cover.
• Pull the buckle, retainer and
strap completely out of the
shell and cover.
• Turn the buckle strap retainer
so that the short side will go
through the slot in the infant
car seat cover and shell.
• Feed the retainer through the
slot in the cover and shell for
the desired buckle position.
• Once through, pull up on the
buckle from the top of the seat
to ensure that the buckle strap
is seated correctly with the red
button facing out.
IMPORTANT: Your infant car seat has been assembled with the
buckle strap in the inner position for infants weighing less than 5 kg
(11 lbs). Once your child reaches 5 kg (11 lbs) re-route the buckle
position to the outer slot. Follow the steps below to adjust the
buckle position. See pages 6 and 28 for important information for
adjusting the harness straps for the fit of your child.
Securing Your Child
Securing Your Child