User guide

20 21
Installing with Base
Installing with Base
Attaching the Car Seat Uninstalling the Base
Removing the Car Seat
• Ensure that the base is
securely installed.
• Place the infant car seat into
the base and press down until
a click is heard.
• For LCS installation, press the
adjuster release button on the
lower connector strap and
loosen the strap.
• Pull and hold the release lever
on the back of the infant car
seat.
• Pull up on the infant car seat
to verify attachment.
• Ensure that the carry handle
is in one of the three locked
positions.
• Press each of the red
release buttons on the lower
connectors and pull them off
of the vehicle anchors.
• Store the lower connectors in
the storage slots in the base
until reinstalling.
• For lap-shoulder and lap belt
installations, open the lock-off
to release the vehicle belt.
• Unbuckle the vehicle belt and
pull the belt from the base belt
guides.
• Lift the infant car seat up from
the base.