User guide

64 Care and Maintenance
1 Route the top part of the
cover over the infant carrier
shell.
* Be careful not to damage the
EPS foam.
2 Pull the harness straps, chest
clips, and buckle tongues
through the slots in the cover.
3 Turn the buckle strap retainer
so the short side will fit
through the desired slots in
the cover, foam and infant
carrier shell to replace the
buckle.
IMPORTANT: Your infant carrier has been assembled with the buckle
strap in the inner position, and the harness straps adjusted to the inner
strap loops for infants weighing less than 11 lbs (5 kg). Once your child
reaches 11 lbs (5 kg) re-route the buckle position to the outer slot and
adjust the harness straps to the end loops for the remainder of use with
that child. Follow the procedures below to adjust the buckle position.
See pages 49 – 52 for instructions on removing and replacing the
buckle and adjusting the harness strap loops.
Refitting the Cover: