User guide

43
Follow the steps below if adjustment of the recline angle is
necessary:
a Unbuckle the seat belt.
b Place a rolled towel or pool
noodle(s) in the vehicle seat
bight.
* See note below.
c Place the infant carrier on the
towel or pool noodle(s) to help
level the base.
Repeat the previous steps until a secure installation with proper
recline angle is achieved. Continue with installation instructions from
step 2 on page 40.
NOTE: Configure pool noodle(s) to accommodate variations in
vehicle seat contour as necessary.
Installing Your Infant Carrier without Base
12 The proper recline angle
is achieved when the level
indicators on the infant carrier
are within the level lines.
* The vehicle should be parked
on a level surface.
NOTE: It may be necessary to install the infant carrier more than once to
achieve the proper recline angle.