User guide

37
3 Route the lap part of the
vehicle belt through the
second belt guide.
* Do not route the shoulder part of
the vehicle belt through the belt
guides.
Installing Your Infant Carrier without Base
4 Verify that the vehicle belt is
not twisted and then buckle.
5 Lock your vehicle seat belt
system as instructed by your
vehicle owner’s manual.
* See pages 11 – 15 for more
information.
6 Push the infant carrier firmly
into the vehicle seat while
removing all slack from the
lap part and then the shoulder
part of the vehicle belt.
IMPORTANT: If you cannot lock your vehicle seat belt you must use a
locking clip. See pages 40 – 43. Contact Britax Consumer Services at
1.888.427.4829 to obtain a locking clip.