User guide

11
Compatible Vehicle Seat Belts
NOTE: The information in this section only applies to installation with
vehicle safety belts.
Vehicle seat belts compatible with this child seat are: Lap-shoulder
belts and Lap only belts equipped with a switchable retractor, or an
automatic locking retractor (ALR), or a locking latch plate.
Vehicle seats and safety belts differ from vehicle to vehicle. Your vehicle
owner’s manual will have information on the types of vehicle belts in your
vehicle. Refer to your vehicle owner’s manual for specific information
about vehicle safety belts and their use with child seats.
Lap-Shoulder (3 Point) Belt
Switchable Retractor in ALR (Automatic Locking Retractor) Mode
with Sliding Latch Plate
1 Has a latch plate that freely
slides along the vehicle belt
webbing.
2 Has a retractor that can be
switched so that it always
locks (Automatic Locking
Retractor – ALR) or so it only
locks during sudden stops or
crashes (Emergency Locking
Retractor – ELR).
* To use this infant carrier with this
type of vehicle belt, you must
switch to the ALR mode or use
child seat lock-offs with base or a
locking clip with carrier only.
NOTE: Refer to your vehicle owner’s manual to determine the kind of
retractors used in your vehicle and how to operate them.
Vehicle Compatibility