Datasheet

1 metre ducting kit – Duct 2609
comprises of
A
One metre pipe - Duct/1100-6
B
90° Bend - Duct/690
C
Wall vent - Duct/6900
Always try to position your cooker
and hood on an outside wall.
This makes for the easiest
installation. It also minimises the
ducting run length and maximises
the hood’s performance.
1 metre ducting kit – Duct 2609
comprises of
A
One metre pipe - Duct/1100-6
B
90° Bend - Duct/690
C
Wall vent - Duct/6900
You will also need:
D
Pipe connection - Duct/693
E
1 metre pipe – Duct/1100-6
or
2 metre pipe – Duct/1200 - 6
Sometimes this is the ideal solution
for kitchens with a false ceiling or for
use in a bungalow. If being used in a
house, check you have enough space.
Check the direction of joists.
Do not cut holes through joists.
‘Mega Duct’ kit – Duct 2652B
comprises of
A
150mm pipe (cut to size)
B
Adjustable spigot 90° round*
to rectangular bend
C
1 Metre at of channel
(can be cut to size)
D
Flat channel connector
E
Rectangular to round adaptor
F
Wall plate
G
Outside wall vent
Hood tted on an outside wall using
150mm diameter ducting
Hood tted on an inside wall using
150mm diameter ducting
Hood tted on an inside wall
to run across top of units
*The 90° bend should be tted
outside and above the ue of the
chimney board. ‘Mega Duct’ can
be boxed in to match kitchen and
decorative ue sections.
A
A
B
C
A
A
B
C
D
E
A
B
C
C
D
E
F
G
Hood Ducting Information
74