Instructions / Assembly
10
Use and Care
household filtration
Brita
®
Heavy Duty Drop-in Filtration WHS-101
Usage and quality of water in your cold water line aect the life of filter cartridges.
Cartridges should be replaced sooner if water pressure at the faucet begins to drop
noticeably or if the filter fails to perform satisfactorily.
After prolonged periods of non-use, it is recommended that the filter be
flushed thoroughly. Let water run for 10 minutes before using.
The filter used with this filter housing has a limited service life. Changes in
taste, odor, and/or flow of the water being filtered indicate that the filter
should be replaced.
Part Number Description
WFBAB-100 Mounting Bracket
WFBAO-100 O-Ring
WFBAW-100 Housing Wrench
Replacement Parts
Housing
Filter Model Numbers
WHS-101 Heavy Duty Drop-in Filtration
WHF-205 -GAC Heavy Duty Drop-In Filter
Flow Rate: 10 gpm (37.85 lpm)
Operating pressure 30-100 psi (207-690kPa)
WHF-201 - Poly Pleat
Flow Rate: 10 gpm (37.85 lpm)
Operating Pressure 30-100 psi (207-690 kPa)
WHF-204 -Sediment Carbon Wrap
Flow Rate: 5 gpm (18.9 lpm)
Operating Pressure 30-100 psi (207-690 kPa)
Replace filters every six months or when flow rate
decreases significantly.
The above flow rates are not performance tested or Certified by NSF.